Tom's Hardware > Forum > Overclocking > Motherboards > Help on ASUS P5B-E IEEE Connection to Front Panel IEEE

Help on ASUS P5B-E IEEE Connection to Front Panel IEEE

Forum Overclocking : Motherboards - Help on ASUS P5B-E IEEE Connection to Front Panel IEEE

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Fedman   03-01-2007 at 08:01:36 AM

This is my 1st build. I need help in connecting the Front Panel IEEE wires of my Aerocool ExtremEngine 3T case to the ASUS P5B-E Mobo pins. The case has 7 wires and the AUS Mobo has 10 pins. I matched up 4 of the 7 wire (shown below) from the case but I do not know where the other 3 wires go to. Below are the pin setup and wires:

Mobo Pins Case Wires
TPA+, TPA- = TPA+, TPA-
GND, GND =
TPB+, TPB- = TPB+, TPB-
+12V, +12V =
Blank, GND =

The the extra wire from the case are labeled Shield, VG and VP. Which pins do they get attached to?

Add a reply
Sponsored Links
Register or log in to remove.
31computers   03-04-2007 at 09:47:16 PM
- 0 +

I cannot see it from my two Asus books. You will either have to Google it, or get onto the Asus website for mobo manual 8O

Reply to 31computers
Ask the community Add a reply
Tom's Hardware > Forum > Overclocking > Motherboards > Help on ASUS P5B-E IEEE Connection to Front Panel IEEE
Go to:

There are 1257 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.313 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them
How do I win badges?