BIOS won't read through memory

[Stone9]

Hi guys,

I recently built a new machine using a combo package from Fry's:

E6400
ECS P965T-A
2 GB OCZ Gold Edition 800 MHz

However, when the machine boots up, in the BIOS screen, it gets to the point where it reads the CPU, but then it never reads through the RAM and just sits there. I can't DEL or anything to get into the BIOS.

Any ideas on what my problem might be?

Thanks in advance guys!

 

[PC_Side_Line]

did u try replacing the ram?

 

[CmdPT]

Try using 1 stick of RAM and putting the voltage to 2.1V (0.3+)

 

[akhilles]

Reset the cmos. Refer to the manual.