Continous loop when installing 2K PRO

Archived from groups: microsoft.public.win2000.setup (More info?)

To do a clean install, either boot the Windows 2000 install CD-Rom or setup
disks. The set of four install disks can be created from your Windows 2000
CD-Rom; change to the \bootdisk directory on the CD-Rom and execute
makeboot.exe (from dos) or makebt32.exe (from 32 bit) and follow the
prompts.

When you get to the point, delete the existing NTFS and or other partitions
found. After you delete the partition(s) abort the install, then again
restart the pc booting the CD-Rom or setup disks to avoid unexpected drive
letter assignments with your new install.

Be sure to apply these to your new install before connecting to any network.

http://download.microsoft.com/down [...] SP4_EN.EXE
http://www.microsoft.com/technet/s [...] 3-043.mspx
http://www.microsoft.com/technet/s [...] 3-049.mspx

You didn't mention the drive controller (possibly SCSI, or ultra DMA, or
ATA100, or raid, or serial ATA), but you may need to boot the Windows 2000
setup disks or CD-Rom and *F6* very early and very important (at setup is
inspecting your system) in the setup to prevent drive controller detection,
and select S to specify additional drivers. Then later you'll be prompted to
insert the manufacturer supplied Windows 2000 driver for your drive's
controller in drive "A"

If you wait and then S to specify additional drivers, then it may be too
late as Windows 2000 Setup at this point may have already assigned the
resources your drive's controller is wanting to use.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

"emt706" wrote:
| After replaceing the mother board, I ran FDISK and removed all partions,
and
| the install program reformated the HDD.
| I will get all the way to "SAVEING SETTINGS" (after the REG update and
| before removeing TEMP files)it gets half way and reboots and strts this
| portion of setup again searches for perif., reg edit,and reboots when
SAVEING
| SETTINGS.
| This will go on indefinitly.
|
| SO I reformatted and went to WIN XP HOME
| Same exact problem at the exact same place during install of XP too???
|
| I have ran out of ideas.
| Any suggestions?