DS3 (3.3) DDR2 OverVoltage Control

[mildten]

hi, Im installing OS (win2000 pro, will buy vista soon) on DS3 but its rebooting after windows log-in screen all the time. This starts happening after installing some Chipset drivers from Gigabyte CD. (I think I was just installing LAN Driver, and Gigabyte SATA and RAID Driver)

Im troubleshooting now, but one concern I have is that Im using Supertalent PC2-6400 and it is rated 2.2V..should I change on Bios-DDR2 OverVoltage Control at all? currently it is set as Normal. should I go for like +0.4v or other?

thanks for your help!!

E6600
DS3 (3.3)
SATA 500GB
x1900xt
XFI platium
Supertalent 2GB 6400
Tuniq Tower120
currently no OC.

 

[Jizumonkey]

The DS3 defaults at 1.8V, which is why many people have trouble with their RAM getting it to even boot! Mine is currently set at +0.2V for OCZ DDR2 800 as 2.0V is the manufacturers recommended running voltage.

You'll need to adjust yours accordingly if what you say is true about your memory's running voltage.

 

[mildten]

thank you for the reply.
I just re-install OS again, and somehow its fine now.
Its still set as 1.8V (default).