Modifying Sysprep

Archived from groups: microsoft.public.win2000.setup_deployment (More info?)

I clean a machine and get it all setup. I have modified
my sysprep.inf file to do everything I need it to and make
sure the [SysprepMassStorage] contains the correct IDE
controller. I run sysprep, ghost the image, and all is
well.

Down the road, I decide to use this image for a different
PC with a different IDE controller. So I run PNPIDS and
determine the correct line to add under the
[SysprepMassStorage] section of my sysprep.inf file inside
my image. Problem is that the image is an NTFS image so
you can't edit any of the files in the image with Ghost
Explorer.

I tried Ghosting the image to this other PC and then I
thought I could boot using NTFSDOS and replace the
sysprep.inf file with a modified one but there is no way
that I know of to pass credentials in DOS, so I cannot get
access to overwrite or edit the existing sysprep.inf.

I don't want FAT32 images, so how are you supposed to be
able to keep updating the old sysprep.inf as machines come
out with different IDE controllers?

Thanks,
4 answers Last reply
More about modifying sysprep
  1. Archived from groups: microsoft.public.win2000.setup_deployment (More info?)

    Try adding this registry information to your image before you run sysprep, I
    had the same type of dilemna, i have about 4 dif models of dells, id take an
    image of one model, restore it to another and get a blue screen saying
    Inaccessible_boot_device. I got this from this article
    http://support.microsoft.com/default.aspx?scid=kb;en-us;822052
    FYI, I do not have the MassStorageDrivers section in my sysprep.inf and it
    seems to work fine. I do a "sysprep -bmsd" when I sysprep the machine. Hope
    this helps

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    primary_ide_channel]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="atapi"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    secondary_ide_channel]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="atapi"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    *pnp0600]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="atapi"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    *azt0502]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="atapi"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    gendisk]
    "ClassGUID"="{4D36E967-E325-11CE-BFC1-08002BE10318}"
    "Service"="disk"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#cc_0101]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_0e11&dev_ae33]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_1039&dev_0601]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase
    \pci#ven_1039&dev_5513]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_1042&dev_1000]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_105a&dev_4d33]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_1095&dev_0640]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_1095&dev_0646]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_1095&dev_0646&REV_05]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_1095&dev_0646&REV_07]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_1095&dev_0648]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_1095&dev_0649]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_1097&dev_0038]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_10ad&dev_0001]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_10ad&dev_0150]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_10b9&dev_5215]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_10b9&dev_5219]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_10b9&dev_5229]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="pciide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_1106&dev_0571]
    "Service"="pciide"
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_8086&dev_1222]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="intelide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_8086&dev_1230]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="intelide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_8086&dev_2411]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="intelide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_8086&dev_2421]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="intelide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_8086&dev_7010]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="intelide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_8086&dev_7111]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="intelide"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\
    pci#ven_8086&dev_7199]
    "ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    "Service"="intelide"

    ;Add driver for Atapi (requires Atapi.sys in Drivers directory)

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi]
    "ErrorControl"=dword:00000001
    "Group"="SCSI miniport"
    "Start"=dword:00000000
    "Tag"=dword:00000019
    "Type"=dword:00000001
    "DisplayName"="Standard IDE/ESDI Hard Disk Controller"
    "ImagePath"=hex(2):53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,
    00,\

    52,00,49,00,56,00,45,00,52,00,53,00,5c,00,61,00,74,00,61,00,70,00,69,00,2e,\
    00,73,00,79,00,73,00,00,00

    ;Add driver for intelide (requires intelide.sys in drivers directory)

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\IntelIde]
    "ErrorControl"=dword:00000001
    "Group"="System Bus Extender"
    "Start"=dword:00000000
    "Tag"=dword:00000004
    "Type"=dword:00000001
    "ImagePath"=hex(2):53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,
    00,\

    52,00,49,00,56,00,45,00,52,00,53,00,5c,00,69,00,6e,00,74,00,65,00,6c,00,69,\
    00,64,00,65,00,2e,00,73,00,79,00,73,00,00,00


    ;Add driver for Pciide (requires Pciide.sys and Pciidex.sys in Drivers
    directory)

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PCIIde]
    "ErrorControl"=dword:00000001
    "Group"="System Bus Extender"
    "Start"=dword:00000000
    "Tag"=dword:00000003
    "Type"=dword:00000001
    "ImagePath"=hex(2):53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,
    00,\

    52,00,49,00,56,00,45,00,52,00,53,00,5c,00,70,00,63,00,69,00,69,00,64,00,65,\
    00,2e,00,73,00,79,00,73,00,00,00

    "Gary" <anonymous@discussions.microsoft.com> wrote in message
    news:6c6601c475af$9d4ca8f0$a401280a@phx.gbl...
    > I clean a machine and get it all setup. I have modified
    > my sysprep.inf file to do everything I need it to and make
    > sure the [SysprepMassStorage] contains the correct IDE
    > controller. I run sysprep, ghost the image, and all is
    > well.
    >
    > Down the road, I decide to use this image for a different
    > PC with a different IDE controller. So I run PNPIDS and
    > determine the correct line to add under the
    > [SysprepMassStorage] section of my sysprep.inf file inside
    > my image. Problem is that the image is an NTFS image so
    > you can't edit any of the files in the image with Ghost
    > Explorer.
    >
    > I tried Ghosting the image to this other PC and then I
    > thought I could boot using NTFSDOS and replace the
    > sysprep.inf file with a modified one but there is no way
    > that I know of to pass credentials in DOS, so I cannot get
    > access to overwrite or edit the existing sysprep.inf.
    >
    > I don't want FAT32 images, so how are you supposed to be
    > able to keep updating the old sysprep.inf as machines come
    > out with different IDE controllers?
    >
    > Thanks,
  2. Archived from groups: microsoft.public.win2000.setup_deployment (More info?)

    Dans le message <6c6601c475af$9d4ca8f0$a401280a@phx.gbl>,
    Gary [anonymous@discussions.microsoft.com] s'exprima en ces termes :

    > I clean a machine and get it all setup. I have modified
    > my sysprep.inf file to do everything I need it to and make
    > sure the [SysprepMassStorage] contains the correct IDE
    > controller. I run sysprep, ghost the image, and all is
    > well.
    >
    > Down the road, I decide to use this image for a different
    > PC with a different IDE controller. So I run PNPIDS and
    > determine the correct line to add under the
    > [SysprepMassStorage] section of my sysprep.inf file inside
    > my image. Problem is that the image is an NTFS image so
    > you can't edit any of the files in the image with Ghost
    > Explorer.
    >
    > I tried Ghosting the image to this other PC and then I
    > thought I could boot using NTFSDOS and replace the
    > sysprep.inf file with a modified one but there is no way
    > that I know of to pass credentials in DOS, so I cannot get
    > access to overwrite or edit the existing sysprep.inf.
    >
    > I don't want FAT32 images, so how are you supposed to be
    > able to keep updating the old sysprep.inf as machines come
    > out with different IDE controllers?
    >
    > Thanks,

    Hi

    Why don't you update the MassStorage section in your sysprep.inf file and
    reimage ?

    --
    ________________________________
    Nicolas
    enlever (remove) stoplapub

    "This behavior is by design" (Microsoft)
    ________________________________
  3. Archived from groups: microsoft.public.win2000.setup_deployment (More info?)

    Thanks,

    I do not have the MassStorageDrivers section in my
    sysprep.inf either and I don't beieve you need it unless
    you are going to use the image on a machine that has a
    special IDE controller.

    The bmsd switch is only going to add all of the PNPIDs
    that come with Windows to the SysprepMassStorage section
    of the sysprep.inf file which can be done manually just as
    easy. The problem I have is when you want to use that
    same image with a machine that has a PNPID other than what
    comes with Windows, you are stuck.

    What would be slick is if you could some how edit or
    replace the sysprep.inf file inside the image. Ghost
    Explorer allows this, but only if the image is from a
    partition that was not NTFS. So I can't use NTFS because
    I might need the ability to change 1 file in the image
    later on. Seems rediculous to me.


    >-----Original Message-----
    >Try adding this registry information to your image before
    you run sysprep, I
    >had the same type of dilemna, i have about 4 dif models
    of dells, id take an
    >image of one model, restore it to another and get a blue
    screen saying
    >Inaccessible_boot_device. I got this from this article
    >http://support.microsoft.com/default.aspx?scid=kb;en-
    us;822052
    >FYI, I do not have the MassStorageDrivers section in my
    sysprep.inf and it
    >seems to work fine. I do a "sysprep -bmsd" when I sysprep
    the machine. Hope
    >this helps
    >
    >Windows Registry Editor Version 5.00
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >primary_ide_channel]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="atapi"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >secondary_ide_channel]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="atapi"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >*pnp0600]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="atapi"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >*azt0502]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="atapi"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >gendisk]
    >"ClassGUID"="{4D36E967-E325-11CE-BFC1-08002BE10318}"
    >"Service"="disk"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#cc_0101]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_0e11&dev_ae33]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_1039&dev_0601]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase
    >\pci#ven_1039&dev_5513]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_1042&dev_1000]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_105a&dev_4d33]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_1095&dev_0640]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_1095&dev_0646]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_1095&dev_0646&REV_05]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_1095&dev_0646&REV_07]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_1095&dev_0648]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_1095&dev_0649]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_1097&dev_0038]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_10ad&dev_0001]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_10ad&dev_0150]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_10b9&dev_5215]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_10b9&dev_5219]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_10b9&dev_5229]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="pciide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_1106&dev_0571]
    >"Service"="pciide"
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_8086&dev_1222]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="intelide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_8086&dev_1230]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="intelide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_8086&dev_2411]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="intelide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_8086&dev_2421]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="intelide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_8086&dev_7010]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="intelide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_8086&dev_7111]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="intelide"
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Critic
    alDeviceDatabase\
    >pci#ven_8086&dev_7199]
    >"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
    >"Service"="intelide"
    >
    >;Add driver for Atapi (requires Atapi.sys in Drivers
    directory)
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
    ]
    >"ErrorControl"=dword:00000001
    >"Group"="SCSI miniport"
    >"Start"=dword:00000000
    >"Tag"=dword:00000019
    >"Type"=dword:00000001
    >"DisplayName"="Standard IDE/ESDI Hard Disk Controller"
    >"ImagePath"=hex
    (2):53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,4
    4,
    >00,\
    >
    >52,00,49,00,56,00,45,00,52,00,53,00,5c,00,61,00,74,00,61,0
    0,70,00,69,00,2e,\
    > 00,73,00,79,00,73,00,00,00
    >
    >;Add driver for intelide (requires intelide.sys in
    drivers directory)
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Intel
    Ide]
    >"ErrorControl"=dword:00000001
    >"Group"="System Bus Extender"
    >"Start"=dword:00000000
    >"Tag"=dword:00000004
    >"Type"=dword:00000001
    >"ImagePath"=hex
    (2):53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,4
    4,
    >00,\
    >
    >52,00,49,00,56,00,45,00,52,00,53,00,5c,00,69,00,6e,00,74,0
    0,65,00,6c,00,69,\
    > 00,64,00,65,00,2e,00,73,00,79,00,73,00,00,00
    >
    >
    >;Add driver for Pciide (requires Pciide.sys and
    Pciidex.sys in Drivers
    >directory)
    >
    >
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PCIId
    e]
    >"ErrorControl"=dword:00000001
    >"Group"="System Bus Extender"
    >"Start"=dword:00000000
    >"Tag"=dword:00000003
    >"Type"=dword:00000001
    >"ImagePath"=hex
    (2):53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,4
    4,
    >00,\
    >
    >52,00,49,00,56,00,45,00,52,00,53,00,5c,00,70,00,63,00,69,0
    0,69,00,64,00,65,\
    > 00,2e,00,73,00,79,00,73,00,00,00
    >
    >"Gary" <anonymous@discussions.microsoft.com> wrote in
    message
    >news:6c6601c475af$9d4ca8f0$a401280a@phx.gbl...
    >> I clean a machine and get it all setup. I have modified
    >> my sysprep.inf file to do everything I need it to and
    make
    >> sure the [SysprepMassStorage] contains the correct IDE
    >> controller. I run sysprep, ghost the image, and all is
    >> well.
    >>
    >> Down the road, I decide to use this image for a
    different
    >> PC with a different IDE controller. So I run PNPIDS and
    >> determine the correct line to add under the
    >> [SysprepMassStorage] section of my sysprep.inf file
    inside
    >> my image. Problem is that the image is an NTFS image so
    >> you can't edit any of the files in the image with Ghost
    >> Explorer.
    >>
    >> I tried Ghosting the image to this other PC and then I
    >> thought I could boot using NTFSDOS and replace the
    >> sysprep.inf file with a modified one but there is no way
    >> that I know of to pass credentials in DOS, so I cannot
    get
    >> access to overwrite or edit the existing sysprep.inf.
    >>
    >> I don't want FAT32 images, so how are you supposed to be
    >> able to keep updating the old sysprep.inf as machines
    come
    >> out with different IDE controllers?
    >>
    >> Thanks,
    >
    >
    >.
    >
  4. Archived from groups: microsoft.public.win2000.setup_deployment (More info?)

    Why do people reply and then not write anything?
    >-----Original Message-----
    >Dans le message <6c6601c475af$9d4ca8f0$a401280a@phx.gbl>,
    >Gary [anonymous@discussions.microsoft.com] s'exprima en
    ces termes :
    >
    >> I clean a machine and get it all setup. I have modified
    >> my sysprep.inf file to do everything I need it to and
    make
    >> sure the [SysprepMassStorage] contains the correct IDE
    >> controller. I run sysprep, ghost the image, and all is
    >> well.
    >>
    >> Down the road, I decide to use this image for a
    different
    >> PC with a different IDE controller. So I run PNPIDS and
    >> determine the correct line to add under the
    >> [SysprepMassStorage] section of my sysprep.inf file
    inside
    >> my image. Problem is that the image is an NTFS image so
    >> you can't edit any of the files in the image with Ghost
    >> Explorer.
    >>
    >> I tried Ghosting the image to this other PC and then I
    >> thought I could boot using NTFSDOS and replace the
    >> sysprep.inf file with a modified one but there is no way
    >> that I know of to pass credentials in DOS, so I cannot
    get
    >> access to overwrite or edit the existing sysprep.inf.
    >>
    >> I don't want FAT32 images, so how are you supposed to be
    >> able to keep updating the old sysprep.inf as machines
    come
    >> out with different IDE controllers?
    >>
    >> Thanks,
    >
    >Hi
    >
    >Why don't you update the MassStorage section in your
    sysprep.inf file and
    >reimage ?
    >
    >--
    >________________________________
    >Nicolas
    >enlever (remove) stoplapub
    >
    >"This behavior is by design" (Microsoft)
    >________________________________
    >
    >
    >.
    >
Ask a new question

Read More

Controller Windows