Wiindows Startup freezes after image

[graeme]

Archived from groups: microsoft.public.win2000.setup_deployment (More info?)

Hi

I have been trying to test (unsuccessfully) putting a Dell GX270 image onto
a Dell GX150. I have included the [SysprepMassStorage] section in my
sysprep.inf file and pointed to the correct located on the C: of the GX270
but once the image is placed on the GX150 it says starting windows and then
freezes. Will this be a problem with the Harddrive controller still not
being right or possibly something else. I also removed the Hard drive
controllers out of the device manager before syspreping the GX270 but this
didn't help either.

Any ideas would be greatly appreciated

G

 

[Guest]

Archived from groups: microsoft.public.win2000.setup_deployment (More info?)

=?Utf-8?B?R3JhZW1l?= <Graeme@discussions.microsoft.com> wrote in
news:4C145BBB-5C52-493B-B042-1F0DD8D08DC3@microsoft.com:

> Hi
>
> I have been trying to test (unsuccessfully) putting a Dell GX270
> image onto a Dell GX150. I have included the [SysprepMassStorage]
> section in my sysprep.inf file and pointed to the correct located
> on the C: of the GX270 but once the image is placed on the GX150
> it says starting windows and then freezes. Will this be a problem
> with the Harddrive controller still not being right or possibly
> something else. I also removed the Hard drive controllers out of
> the device manager before syspreping the GX270 but this didn't
> help either.
>
> Any ideas would be greatly appreciated

Generally, failure to setup the [SysprepMassStorage] section correctly
will result in a BSOD 0x7b STOP message: not a lock up. Could be a HAL
issue or drivers. Try adding "/bootlog /sos" to your OS entries in C:
\boot.ini and find out the last driver it is loading before it locks
up. Then try renaming that file in the Recovery Console and see if it
continues on.

Adam