Blank DVD-R recognized as CD-R

[Guest]

Archived from groups: microsoft.public.windowsxp.basics (More info?)

I have a DVD-R/CD-RW drive and a USB DVD-RW.
When I insert a blank DVD-R, the drive changes to CD-R and shows an error
message.
Any sugestions?
This had worked before. I think a windows update or software installation
changed the driver environment.
Thanks,
André.

 

[Guest]

Archived from groups: microsoft.public.windowsxp.basics (More info?)

It is not unheard of that CD/DVD media gets mislabeled. It
is also possible that the drives have been corrupted.

Examine the disk and compare it to a known DVD to be sure it
was properly packaged. Use a magnifying glass if needed to
read the inner ring data around the hole. Look at the edge.

If the DVD is a DVD, use the device manager to remove the
drives and controllers and reboot (refresh the hardware) to
get the drivers reinstalled.


--
The people think the Constitution protects their rights;
But government sees it as an obstacle to be overcome.


"aportella" <aportella@discussions.microsoft.com> wrote in
message
news:B1B2A3DB-D946-4DB1-92D9-A6560320819F@microsoft.com...
|I have a DVD-R/CD-RW drive and a USB DVD-RW.
| When I insert a blank DVD-R, the drive changes to CD-R and
shows an error
| message.
| Any sugestions?
| This had worked before. I think a windows update or
software installation
| changed the driver environment.
| Thanks,
| André.

 

[Guest]

Archived from groups: microsoft.public.windowsxp.basics (More info?)

It may be software-related. I have a Plextor combo drive, using Nero version
6. If I don't select the type of media I plan to use up front, the software
will sometimes give me an error.

"aportella" <aportella@discussions.microsoft.com> wrote in message
news:B1B2A3DB-D946-4DB1-92D9-A6560320819F@microsoft.com...
>I have a DVD-R/CD-RW drive and a USB DVD-RW.
> When I insert a blank DVD-R, the drive changes to CD-R and shows an error
> message.
> Any sugestions?
> This had worked before. I think a windows update or software installation
> changed the driver environment.
> Thanks,
> André.

 

[Guest]

Archived from groups: microsoft.public.windowsxp.basics (More info?)

I uninstall some software, applied xp sp2 again and didn't work.
I uninstall all drivers (CD-RW and DVD-RW) and reboot the machine.
This worked. The DVD-RW is now recognizing a blank DVD.
Thanks.

"Gene Hora" wrote:

> It may be software-related. I have a Plextor combo drive, using Nero version
> 6. If I don't select the type of media I plan to use up front, the software
> will sometimes give me an error.
>
> "aportella" <aportella@discussions.microsoft.com> wrote in message
> news:B1B2A3DB-D946-4DB1-92D9-A6560320819F@microsoft.com...
> >I have a DVD-R/CD-RW drive and a USB DVD-RW.
> > When I insert a blank DVD-R, the drive changes to CD-R and shows an error
> > message.
> > Any sugestions?
> > This had worked before. I think a windows update or software installation
> > changed the driver environment.
> > Thanks,
> > André.
>
>
>