E6300 Temp too high?

[707782]

Before, normally, I would get about 39-42 idle, and 55-57 full load. (coretemp and tat)

I did some reseating of my hs, and reapply arctic silver 5.

Now, at idle, my temp is about 48-52, and 58-60 fully loaded.

What could happen? I guess the weather had a lot to do with it, because these couple days is pretty hot compare to last month or so.

I'm using the stock cooling and stock speed, vcore is 1.225 (10 degree hotter when it's at 1.325 when fully load)

I have a antec p180 with 3 120mm fans.

I just can't believe when many others are reporting that they're able to overclock it to 3.0 and something with the stock hs, and their temp is even lower than mine.

What's going on?

 

[707782]

Also I noticed that lower the vcore won't help idle temp a bit, but it will greatly reduce the loaded temp, why is this?

Should I lower the voltage more since I'm running stable at 1.225v.

 

[CompuTronix]

Please read the Core 2 Duo Temperature Guide, then re-test your system as shown in the "Testing" section, and post your info as shown in the "Results" and "Variables" sections, so I can analyze your temps.

Thanks,

Comp 8)