Configuring Motorolla DCT 6200 with Samsung LT-P227W

Archived from groups: alt.tv.tech.hdtv (More info?)

bsisco wrote:
> Is there a special configuration for the audio cables?
>
> I'm using monster red and white from the audio out on the Motorola
> receiver to the audio in next to the component in on the Samsung.
>
> Thanks.
>
> Ben

Maybe DVI and analog audio inputs do not work together? Try a digital audio
input (coax or optical)

Archived from groups: alt.tv.tech.hdtv (More info?)

Phil Ross wrote:
> According to the manual fior your set
>
(http://downloadcenter.samsung.com/content/UM/200401/20040128190942609_BN68-
00574A-01Eng.pdf)
> it looks like the audio input on your TV that goes with the DVI input
> is the PC AUDIO INPUT jack (the little "phone-type"connector under
> the S-video connector), NOT the RCA-type connectors above the video
> in connector.
>
> Hope this helps.
>
> Phil

I believe bsisco was the original poster with the issue. Good find, I hope
he has his thread marked.....

>
> "L Alpert" <alpertl@xxcomcast.net> wrote in message
> news:r8B5d.121364$D%.59075@attbi_s51...
>> bsisco wrote:
>>> Is there a special configuration for the audio cables?
>>>
>>> I'm using monster red and white from the audio out on the Motorola
>>> receiver to the audio in next to the component in on the Samsung.
>>>
>>> Thanks.
>>>
>>> Ben
>>
>> Maybe DVI and analog audio inputs do not work together? Try a
>> digital audio
>> input (coax or optical)