Hard Drive Help!

Im sure my Harddrive is a SATA 150 can this work with a SATA 300 port in a motherboard?
4 answers Last reply
More about hard drive help
  1. It should be backwards compatible -- the motherboard, that is. The only time you have a problem is the other way around -- a SATA 300 on a SATA150 (motherboard) port. Then you have to set a jumper.
  2. k good.
  3. Go for it.You should have no problem running it on that board.If it was the other way around,then you would have to set a jumper on the harddrive so it would run at 150.Have fun.

    Dahak

    AMD X2-4400+@2.6 TOLEDO
    EVGA NF4 SLI MB
    2X EVGA 7950GT KO IN SLI
    4X 512MB CRUCIAL BALLISTIX DDR500
    WD300GIG HD/SAMSUNG 250GIG HD
    ACER 22IN WIDESCREEN LCD 1600X1200
    THERMALTAKE TOUGHPOWER 850WATT PSU
    COOLERMASTER MINI R120
    3DMARK05 13,471
  4. well im sure my HDD is 3GBs but it might not be because it was stocked with a 1.5gbs mobo. But ill go for it.
Ask a new question

Read More

SATA Hard Drives Motherboards Components