e6300 Overclock can i push it more? look good?

[Uscooper]

picture pretty much sums it up P5b-e mobo, Mushkin pc6400 ram, zalman 9500. I'm on it now running great- one thing tho i set cpu voltage in bios to 1.4 its showing as 1.352 by cpu-z and pc wizard which is right or is it ok either way?

http://farm1.static.flickr.com/177/445723872_0e9f96dc55_o.jpg

 

[rdhood]

that pic shows 400fsb and 1.352V. My 6300 made it to 430fsb (3ghz) with no increase in cpu voltage at all (1.325).

If you haven't yet tweaked it, try lower voltage and/or raising fsb. Get TAT and monitor temperature.

 

[Uscooper]

kk, my ram runs stock at 1.8 - using the overclocking guide on here i put it at 2.1 is that safe? or can it run at 1.8 since its pc6400. Tat recognizes my cpu as a pentium m- but iv heard of others that that happened to. When i set my vcore to stock it shows up as 1.28 in xp