Memory issue?

[htoonthura]

Hello

i would like to use GIGABYTE GA-965P-DS3 LGA 775 Intel P965 Express with mushkin memory that i am using now. The problem is my memory requires at least 2.1v to start with. But the board needs 1.8 v memory. Even though it might be possible to boot with a cheap 1.8 v memory and then change the setting bios and reboot with my mushkin memeory. What i am worried about it that will the bios reset automatically after it crashes due to overclocking?

If so , it is gonna be very inconvinent because i have to go find another cheap memory again to be able to boot with 2.1v. My question is:

Will i be able to boot with 2.1 v memory after the crash or bios flash.

Your help is greatly appreciated.

Thanks.

 

[evongugg]

I have heard other people do it. Put one stick in the motherboard, boot into Bios and change the voltage to +0.3.
You should be okay.

 

[andybird123]

I'm guessing you're not a native english speaker, no offence meant by that, but I don't understand a word of what you're asking

 

[htoonthura]

I'm guessing you're not a native english speaker, no offence meant by that, but I don't understand a word of what you're asking

yes. you are right. i am not a native speaker. But it is very bad if you are native speaker and you can not understand a word that i wrote.