Please help with my Core 2 temp

[phreax]

Room Temp = 23c
Chipset = P965
C2D = E4300
CPU Cooler = Cooler Master Hyper TX
Frequency = 2.4 Ghz
Load = TAT
Motherboard = Asus P5B-E Plus
Vcore = Auto (I think it's 1.325 V)

My Tcase is ~15c lower than Tjunction right? I got them the other way around using SpeedFan. My cores are lower by ~15c instead, and TAT shows that the cores are about the same as SpeedFan's CPU reading.

Temperatures(Idle/Load):
TAT = 46c/65c
SpeedFan = Idle: CPU = 46c, Core 1/2 = 31c
Load: CPU = 63c, Core 1/2 = 52c

I'm confused. Please advise...any help will be apreciated! Thanks.

 

[bigspin]

Room Temp = 23c
Chipset = P965
C2D = E4300
CPU Cooler = Cooler Master Hyper TX
Frequency = 2.4 Ghz
Load = TAT
Motherboard = Asus P5B-E Plus
Vcore = Auto (I think it's 1.325 V)

My Tcase is ~15c lower than Tjunction right? I got them the other way around using SpeedFan. My cores are lower by ~15c instead, and TAT shows that the cores are about the same as SpeedFan's CPU reading.

Temperatures(Idle/Load):
TAT = 46c/65c
SpeedFan = Idle: CPU = 46c, Core 1/2 = 31c
Load: CPU = 63c, Core 1/2 = 52c

I'm confused. Please advise...any help will be apreciated! Thanks.

Hey brother I also have P5B-E mobo with E6400 L2 stepping.I OC my CPU to 374 x 8 (2880Mhz @ 1.365V).According to TAT my temps are 48c Idle and 70c load.Coretemp 95 shows the same results.But speedfan show Low temp results like you.maybe all the L2 stepping have some heat bug.but i try to chk L2 stepping shutdown temp.I stop all the case fans and I stop CPU fan too.I run tat @ 100% .When tat reach 89/90c system restarts(speedfan is at 70C ).So i think 85c is the shutdown temp limit for Desktop C2Ds.Because i belive TAT have +3/4c error .
Speedfan show your AUX as 119C.I think all the P5B-E have aux temp bug,coz my speedfan results are same like you.

 

[phreax]

Hey thanks for the reply man. Good to hear that others have the same problem as me. I wasn't sure which reading to trust because I'd like to oc my E4300, but got scared of the temps TAT is showing. I can run Orthos @ 3Ghz but like I said, scared of the temps (roughly +10c from what I have right now) Anybody can shed some light on this? Thanks in advance.

 

[bigspin]

Hey thanks for the reply man. Good to hear that others have the same problem as me. I wasn't sure which reading to trust because I'd like to oc my E4300, but got scared of the temps TAT is showing. I can run Orthos @ 3Ghz but like I said, scared of the temps (roughly +10c from what I have right now) Anybody can shed some light on this? Thanks in advance.

Yep!!! U ar welcome.Hey if u have any info about why this kind of hi temp please letus update.