Trying to overclock but my system became unstable after 2.4ghz so I was going to up the voltage. However, my BIOS just says [AUTO] for my Voltage so I have to use programs to check it.
CPU-Z says its 1.168v.
Core Temp says my VID is 1.3v
SpeedFan says my Vcore1 is 1.17v, and Vcore2 is 3.2v.
Which one of these is my real voltage?
And also, if it's not my voltage that's causing instability, what could it be?
I set my RAM down from 333mhz to 266mhz, and the HT Link down to 4x when overclocking.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.