Tom's Hardware > Forum > Home Theatre > HDTV > CRT Contrast/Burn-In Question

CRT Contrast/Burn-In Question

Forum Home Theatre : HDTV - CRT Contrast/Burn-In Question

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

Archived from groups: alt.tv.tech.hdtv (More info?)

 

I've read on some sites that CRTs are somewhat susceptible to burn-in and
that always keeping the contrast setting below 50 bars is a good idea. I
have a Philips 34PW8502 which I've set to 49 contrast (heh)... but the
picture is just so DIM. Am I being paranoid, and how likely is burn-in to
occur for a guy who likes his contrast a little higher (say 60-65). I watch
TV in 4:3 when applicable and certain movies in 2:35:1 still have small bars
at the top and bottom. These edges are the places where burn-in is a
concern for me.

Aphelion

Sponsored Links
Register or log in to remove.

Archived from groups: alt.tv.tech.hdtv (More info?)

 

Aphelion <sonship@twcny.rr.com> wrote:
} I've read on some sites that CRTs are somewhat susceptible to burn-in and
} that always keeping the contrast setting below 50 bars is a good idea. I
} have a Philips 34PW8502 which I've set to 49 contrast (heh)... but the
} picture is just so DIM. Am I being paranoid, and how likely is burn-in to
} occur for a guy who likes his contrast a little higher (say 60-65). I watch
} TV in 4:3 when applicable and certain movies in 2:35:1 still have small bars
} at the top and bottom. These edges are the places where burn-in is a
} concern for me.

Direct view CRTs like yours don't burn in anywhere near as easy as rear
projection CRTs and Plasmas are even worse.

60-65% contrast should be fine. My 34" set is 2.5 years old. Between
4:3 shows and 2.35:1 movies I watch a lot of things with black bars and
there is no sign of burn in.

--

Frank Ball frankb@sonic.net

Reply to Anonymous

Archived from groups: alt.tv.tech.hdtv (More info?)

 

Aphelion wrote:

> I've read on some sites that CRTs are somewhat susceptible to burn-in and
> that always keeping the contrast setting below 50 bars is a good idea.

Get a video setup DVD ("Video Essentials", "Avia" etc) and correctly set
all of the video settings. It will improve picture quality and reduce
the risk of uneven phosphor wear.

Matthew

Reply to Anonymous

Archived from groups: alt.tv.tech.hdtv (More info?)

 

Its kind of wierd, on my set I have 3 or 4 preset settings like "Standard"
"Movie" "Pro""vivid". The dimmer settings do indeed look dim, but after a
few days I might say to myself "hmm, the tv looks brighter today I wonder if
the kids changed the mode" and when I check, the tv is still on a dim
setting (movie). Give yourself a chance to get used to a dim setting and
you might just find that you like it better.

--Dan

"Aphelion" <sonship@twcny.rr.com> wrote in message
news:fSfkd.95499$l07.69593@twister.nyroc.rr.com...
> I've read on some sites that CRTs are somewhat susceptible to burn-in and
> that always keeping the contrast setting below 50 bars is a good idea. I
> have a Philips 34PW8502 which I've set to 49 contrast (heh)... but the
> picture is just so DIM. Am I being paranoid, and how likely is burn-in to
> occur for a guy who likes his contrast a little higher (say 60-65). I
watch
> TV in 4:3 when applicable and certain movies in 2:35:1 still have small
bars
> at the top and bottom. These edges are the places where burn-in is a
> concern for me.
>
> Aphelion
>
>

Reply to Anonymous
Tom's Hardware > Forum > Home Theatre > HDTV > CRT Contrast/Burn-In Question
Go to:

There are 926 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Content
They won a badge
Join us in greeting them