Sign in with
Sign up | Sign in
Your question

PROBLEM WITH SATA DVD AND RAID 0 SYSTEM

Last response: in Storage
Share
April 17, 2007 10:17:58 PM

Hello everybody, I have a P5WDH DE LUXE Mobo with a D805@3.7GHz
1.5MB Ram.
The DVD is a samsung SH-S183A SATA.
I was using the system with one Sata drive configured on bios as PATA and was working.
Then I've set up a RAID 0 system with two 200GB Hard Disk. and configured the bios as RAID.
I can't use the SATA DVD on the others port of the ICH controller.
I've tried to use the onboard PCI Jmicron Controller but isn't working with the ODD peripheral.
Then I buy a PATA-SATA converter and connected the SATA peripheral to the PATA controller of ICH.
Isn't working well.
Anybody have a solution for me?
Sorry for my English, isn't good enough!
:) 
April 25, 2007 7:48:32 AM

Hi, there is anybody that can help me???
thanks
May 5, 2007 5:48:29 AM

i thiink u must update to new bios and set default on CPU Clock ( because when u OC your CPU , other devices will OC by MHz too so you cannot add SATA mode by yuur optical dics drive )

fendi
!