My E6320@2.45GHz OC Build!

[vir7uous]

Well, i just recived my all my parts in the mail about 12 hours ago, and was going to wait a few weeks to OC but i couldnt, never the less here is my overclock and build stats.

Also, for all thoes who have helped me along the way, thank you very much! You have made this whole experiance very fun and enjoyable!!! i couldnt be more happy i found this community... So heres my build:
($700 Budget)

C2D E6320
GA-965P-DS3
2GB G.Skill DDR2 800 5-5-5-15
x1950 Pro
WD 160GB
FPS 450W
ACF7

My Overclock:

7 x 350 = 2.45 Ghz
55c Top Temp

ALL Stock Voltage

So i assume everything is good then?

Most guides said to go ahead and bump up my vDIMM +.1 to +.3 but i noticed i got close to 60c so i put it back at stock and ran orthos stable for 30 mins. Should i be good at stock or mine as well bump them up?

Anything else i should change/check? or am i looking good?

 

[locky28]

vdimm is your memory voltage. You should try bumpin up your vcore (CPU voltage) by tiny increments to see if you can get a bit faster FSB from that.

Nice build hf

 

[jay2tall]

55C on the tjunctions is not hot in the least. I'd go for a 400MHz bus speed. The conroe core will be much easier to do this than the Allendale one. I have a e6400 and it took a small amount of effort and a good cooler to get past 375MHZ but 400 was pretty easy.

I say go for it.

BTW good overclock. That's a great budget setup you have for $700 you can't beat it.