vista bsod

vista bsod
i get the error code 0x0000007b
which is something

this is what i got from windows
"CAUSE
This problem may occur if one or more of the following conditions exists:
• Your computer is infected with a boot sector virus.
• A device driver required by your boot controller is not configured to start at boot time or is corrupt. If during a WINNT /B installation no mass storage device was detected.
• A resource conflict exists between the boot controller and another controller in the system or between SCSI devices.
• Drive translation is not being performed or was changed.
• The boot volume is corrupt and cannot be mounted by Windows NT.
• Information in the Windows NT registry about which device drivers load at start up is corrupt.
• If this error occurred during Windows NT Setup while reading Windows NT Setup floppy disk 2, you may have the Drive Swapping option enabled in your computer BIOS.
• Using winnt /b as the installation method may present a timing issue for the disk controller. The controller is not given enough time to respond and identify itself and is therefore detected incorrectly or not at all.
• If you run Setup from a bootable SCSI CD-ROM drive, you receive a STOP 7B error message because Setup does not allow you to add a third-party SCSI driver when you boot from the SCSI CD-ROM."

however i tried repairing going though the achi or whatever but i cannot even find this file, i think i do not have it
anyways can someone tell me, im using daemon tools btw,
so i dl it then i reboot and it gives me the bsod
before copying the files it tells me there may be an issue with scsi and raid, i belive the scsi problem is related to daemon tools
or could it be me sata hard drive?

Ok as for now i just saved the disc to my program files. So that is how i access setup. There is no repair option. I told you after i finish installing, and i reboot it goes to the bsod giving me the inaccessible boot drive error.