I have a 590 sli evga board. My video card is a 7600GT 256mb bfg pcie-x card. 2xgeil 512(each) ram ddr2 pc800 set at 4-4-4-12 with 2.2V to it. Western digital hd 160GB 3gb/s 7200rpm. I have a zalman 9700 cpu cooler. Xion midsized case, with TONS of air flow.
Now for the problem, when I run ntune nvidia monitor, I get error 22, 23, 24 and 26 randomly, also prime95 seems to kick 26. When I get these errors the nvidia monitor loses some of its voltages and sensors...I have reinstalled and updated ntune. When I restart the codes go away and everything is FF again....I can make it do this over and over. It doesn't seem to affect any other performance...any clues, as those codes even when I read the manual are meaningless to me?
Code 22- reserved
Code 23-Program Chipset: Early programming of chipset registers
Code 24-init pnp: init pnp
Code 26- clock gen: init onboard clock generator and sensor
Now for the problem, when I run ntune nvidia monitor, I get error 22, 23, 24 and 26 randomly, also prime95 seems to kick 26. When I get these errors the nvidia monitor loses some of its voltages and sensors...I have reinstalled and updated ntune. When I restart the codes go away and everything is FF again....I can make it do this over and over. It doesn't seem to affect any other performance...any clues, as those codes even when I read the manual are meaningless to me?
Code 22- reserved
Code 23-Program Chipset: Early programming of chipset registers
Code 24-init pnp: init pnp
Code 26- clock gen: init onboard clock generator and sensor