Usb mapping
Last response: in Windows 2000/NT
I had to reload windows 2000 and everything went well except for the USB port does not work. It used to have a mapping letter but doesn't anymore. I need to know the path to get it working properly again.
More about : usb mapping
Mapping letter? USB ports aren't assigned letters... unless you plug a storage device into them... but then it's the storage device that assigned a letter, not the USB port. What are you plugging in that isn't being recognized? If it is a storage device, plug it into another computer to make sure it works. If it does, then check what drive letters are already in use... there are some letters that USB storage devices won't grab. You may also want to check if you need drivers... which you shouldn't, but it is possible.
Related ressources:
- ForumMapping a remote USB thumb-drive
- ForumPS2 USB Adapter button mapping
- ForumUSB 2.0 Pin Mapping
- ForumDrive Mapping - USB Card Reader
- ForumUSB drive mapping
- ForumMapping USB devices over TS?
- ForumUSB mapping in a workgroup network
- ForumDrive Mapping Problem After Hard Drive Replacement
- ForumE991 GPS and Mapping Software ????????????
- ForumJoystick mapping button problem
- ForumUSB mapped drive problem
- ForumMapping to already mapped drive
- ForumVideo memory mapping
- ForumGetting USB port(s) working on Acer AspireOne Netbook
- ForumForcing usb drive to keep a fixed drive letter
- ForumParallel and com ports not appearing in device manager
- ForumUSB problem after upgrade
- ForumUSB pports not recognised
- ForumDisable Autoplay for USB drive
- ForumUsing USB Floppy to install SCSI driver
- More resources
!
