Articles & News
Graphics & Displays
Tom's IT Pro
Login | Sign Up
The authority on tech
1.5gbs on 3.0 gbs
May 11, 2007, 12:14 AM
I was wondering if you can put a 1.5 gbs SATA hard drive into a 3.0gbs SATA port
May 13, 2007
May 11, 2007, 12:45 AM
yes you can
May 11, 2007, 2:10 PM
That's the way I have my 10k WD HDDs. No problem at all
Can't find your answer ? Ask !
Get the answer
May 13, 2007, 5:10 PM
Im wondering is it possible to have SATA II driver in just a standard SATA port. Also these IDE to SATA dongles around, are they any good? and can the be used for RAID 0?
Ask a new question
SATA & IDE
Conect SATA 2 DRIVE TO SATA MOBO
IDE vs SATA help!
Western digital sata hard drive installation
Western Digital 250GB SATA
Sata 2 vs Sata 3
Sata Hard Drive Detected as ide
Help with installation of SATA hard drive
I have a western digital 320g sata hard drive when i copy to the hard drive it s
SATA WD Hard Drives... newegg
WD SATA Hard Drive Install
Western digital sata hard drive WD10EARS
Maxtor and Western Digital
Western Digital, Enclosure, sata data doesn't fit?
Western Digital SATA Hard Drive Install
Looking for a Western Digital SATA HD
New SATA hard drive not detected even in bios
I wish to buy a SATA III hard drive
Want to use old hard drive, but it's IDE cable. Motherboard is sata
Western digital green 500GB raid0! bad result!!!
Subscribe to our newsletter
icon arrow stem circle
About Tom's Hardware
Licensing and Reprints
Other Purch sites
© 2018 Purch All Rights Reserved.