Hi I bought a Arianet WB001 USB Webcam but I can't get it working. The drivers off the CD install fine but when I plug it in and Windows searches for the hardware I get the following message at the end of the installation "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" I had this problem with the other cam I had but I thought it was because it is an old cam, which is why I bought a new one. Any one know how I can get it working thanks in advance.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.