Samsung DLP pincushion

Archived from groups: alt.tv.tech.hdtv (More info?)

Been posted before: Need to remove the front of the set and loosen the
mounting screws for the screen assemblies so they are allowed to foat in the
mounting. Not a job for an amatuer of DIY, we had done a fair number of them
with positive results. Ther are no actual adjustments on Samsung DLP for PCC
adjustment.
"Brad Harper" <bradharperOMITTHIS@comcat.net> wrote in message
news7jzd.255774$V41.196529@attbi_s52...
> Is there a way to adjust/compensate for the pincushion effect on a Samsung
> HL-P5063W? I understand that this is inherent in the design but is there
> anything that can be done or is it just something to live with?
> I have been through the sevice mode menus and I can't find an answer.
>
>

Archived from groups: alt.tv.tech.hdtv (More info?)

BRAD: The process we have used with success on these Samsung Sets: Removal
of the front assembly holding the physical screens, or removal of the rear
assembly holding the mirror. Loosening the mounting screws for the screen
around the whole perimeter of the screen. This allows the screen to float
within it's mount lessening he physical bending of the screen assembly. BTW:
this is not a DIY project for the average consumer.
"Brad Harper" <bradharperOMITTHIS@comcat.net> wrote in message
news7jzd.255774$V41.196529@attbi_s52...
> Is there a way to adjust/compensate for the pincushion effect on a Samsung
> HL-P5063W? I understand that this is inherent in the design but is there
> anything that can be done or is it just something to live with?
> I have been through the sevice mode menus and I can't find an answer.
>
>