Archived from groups: microsoft.public.pocketpc (More info?)

Hi,

My iPAQ 4150 started to run slower and slower, needing stylus-enabled
resets to get it going and then ground to a halt and would not reset -
the boot progress line would stop right at the end and the system would
freeze.

After a while I just left the battery out for a few hours and I was back
in business - I reinstalled all my apps and the unit was working fine. I
then remembered that HP had released a couple of wifi updates for the
PDA and that I had installed them in the past so I downloaded them, but
after loading the first one I lost all ability to see any wifi points. I
tried to remove the update, but it kept reporting that tiacxwln.dll
could not be removed as it was in use or read only. The other update
wants to replace this file but can't because it's in use.

I have tried removing the update in 'flight mode' but this doesn't work
- am I faced with another hardware reset and reinstalling everything again?

Thanks

Archived from groups: microsoft.public.pocketpc (More info?)

Linker3000 <linker3000@youkaytwodotnetuk2.net> wrote:

>Hi,
>
>My iPAQ 4150 started to run slower and slower, needing stylus-enabled
>resets to get it going and then ground to a halt and would not reset -
>the boot progress line would stop right at the end and the system would
>freeze.
>
>After a while I just left the battery out for a few hours and I was back
>in business - I reinstalled all my apps and the unit was working fine. I
>then remembered that HP had released a couple of wifi updates for the
>PDA and that I had installed them in the past so I downloaded them, but
>after loading the first one I lost all ability to see any wifi points. I
>tried to remove the update, but it kept reporting that tiacxwln.dll
>could not be removed as it was in use or read only. The other update
>wants to replace this file but can't because it's in use.
>
>I have tried removing the update in 'flight mode' but this doesn't work
>- am I faced with another hardware reset and reinstalling everything again?

Rename the file using File Manager, then run the uninstall utility,
then soft reset and delete the renamed file.
--
__________________________________________________________________________________
Ed Hansberry (Please do *NOT* email me. Post here for the benefit of all)
What is on my Pocket PC? http://www.ehansberry.com/
Microsoft MVP - Mobile Devices www.pocketpc.com
What is an MVP? - http://mvp.support.microsoft.com/

Archived from groups: microsoft.public.pocketpc (More info?)

Ed Hansberry, MS-MVP/Mobile Devices wrote:

>
> Rename the file using File Manager, then run the uninstall utility,
> then soft reset and delete the renamed file.

Thanks Ed - that got rid of the file - now I just have to work out why
my wifi is still not working!

L3K

Archived from groups: microsoft.public.pocketpc (More info?)

Linker3000 wrote:
> Ed Hansberry, MS-MVP/Mobile Devices wrote:
>
>>
>> Rename the file using File Manager, then run the uninstall utility,
>> then soft reset and delete the renamed file.
>
>
> Thanks Ed - that got rid of the file - now I just have to work out why
> my wifi is still not working!
>
> L3K

Hmm - sprung into life about 15 mins and 3 resets later and working fine
now - weird!

Archived from groups: microsoft.public.pocketpc (More info?)

Try doing a soft reset after going to flight mode. Then remove the update.

> My iPAQ 4150 started to run slower and
> slower, needing stylus-enabled resets to
> get it going and then ground to a halt
> and would not reset - the boot progress
> line would stop right at the end and the
> system would freeze.

> After a while I just left the battery out
> for a few hours and I was back in
> business - I reinstalled all my apps and
> the unit was working fine. I then
> remembered that HP had released a
> couple of wifi updates for the PDA and
> that I had installed them in the past so I
> downloaded them, but after loading the
> first one I lost all ability to see any wifi
> points. I tried to remove the update, but
> it kept reporting that tiacxwln.dll could
> not be removed as it was in use or read
> only. The other update wants to replace
> this file but can't because it's in use.

> I have tried removing the update in 'flight
> mode' but this doesn't work
> - am I faced with another hardware reset
> and reinstalling everything again?

> Thanks



Bye
Growl <growldeep-news1@yahoo.ca>
Mon, 15 Aug 2005 19:29:48 -0230

=== Posted with Qusnetsoft NewsReader 3.3