Tom's Hardware > Forum > General Networking > Network General Discussions > Help with NAS server and ICS
Ask the community Add a reply
Word :    Username :           
 
sugi123   07-22-2007 at 11:42:52 PM

Hey,
I have a problem. I have a DSL router with IP 192.168.1.1 and a DHCP range of 192.168.1.90-.150. So, all computers are setup with DHCP and receive internet properly. However, I have a laptop running ICS on it connected by crossover cable to the NAS. So, the laptop has a DHCP address of 192.168.1.96 BUT the NAS has 192.168.0.108. How can I access the NAS from other computers. At this point, I cannot because the NAS is on a different subnet. Is there any way to change this?

Thanks.

Add a reply
Sponsored Links
Register or log in to remove.
Grumpy9117   07-22-2007 at 11:53:33 PM
- 0 +

Why are you running ICS on the laptop? Why don't you connect the NAS to the DSL router?

Grumpy

Reply to Grumpy9117
sugi123   07-23-2007 at 12:10:55 AM
- 0 +

The NAS and the DSL router are in different rooms, far apart.

Reply to sugi123
Grumpy9117   07-23-2007 at 12:41:05 AM
- 0 +

You can't change the ICS works so the simplest solution is to move the NAS to the same room as the DSL router.

Grumpy

Reply to Grumpy9117
Ask the community Add a reply
Tom's Hardware > Forum > General Networking > Network General Discussions > Help with NAS server and ICS
Go to:

There are 901 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.425 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them