wireless pci card not working

[push110]

Hi

I apologize if this question has been asked before.

I have a dell dimension 9200 system running windows vista and 2Gb of ram. I have a wireless network card installed which has worked perfectly up until i upgraded the ram to 4Gb, now the wireless card doesn't detect any networks at all.

I was wondering if anyone has any ideas as to why the card would work with 2Gb or ram but not 3 or 4.

Thanks

 

[Scotteq]

Try to reset the card with the following:

Start => Run

In the dialog box, please type: netsh winsock reset

Then press the enter key and let it complete. That should reset the networking stack for you.

 

[push110]

Try to reset the card with the following:

Start => Run

In the dialog box, please type: netsh winsock reset

Then press the enter key and let it complete. That should reset the networking stack for you.

I tried typing netsh winsock reset at the command prompt, i got the following message - the requested operation requires elevation.

 

[Zoron]

Run the command prompt as administrator... it's under Accessories.

 

[push110]

Run the command prompt as administrator... it's under Accessories.

Thanks for that, it worked but hasn't had any effect on the wireless card.

 

[notherdude]

remove the device from device manager, reinstall drivers with the latest ones - that's what I would try

BTW what does device manager have to say about the device?

 

[push110]

I've tried removing the device and reinstalling it and it still doesn't work.

Device manager reports that the device is working properly.