Word :    Username :           
 

I keep getting bsod every few hours or so it seems. I'm not getting the same error every time but it is usually irql not equal error, or memory management error. I tested my memory with the diagnostics tool and it didn't find any errors with my ram. I also tried but failed getting memtest to work on vista 64 bit. My specs are Nvidia 9800gt, Intel e8500, vista premium 64 bit, 4 gigs of ram. I'm on the 170.XX nvidia drivers. Does anyone have any idea what I should try next?

Sponsored Links
Register or log in to remove.
- 0 +

Memtest is often on a bootable disk... either CD or floppy... it won't work from within Windows.

------------------------------ Desktop: Windows 7 Professional 64-bit; Intel Q6600 CPU; E-VGA 780i SLI motherboard; E-VGA E-GeForce 8800GT; OCZ Vista 4GB dual-channel kit; Ultra X2 750W power supply; 2 x Seagate Barracuda 7200.11 500GB in RAID 0. Laptop: Acer Aspire 8730-6314;
Reply to Zoron

1. Update all drivers, including your network card.

2. Even if you are passing memory tests you could still be having occasional memory errors in Windows. Go into BIOS and manually adjust all memory settings to mfg. spec. Particularly the voltage. We see a lot of issues related to voltage being set below spec..

3. Run memtest86 for a long time, as Zoron said, not from within windows. You burn the ISO to a cd, which will then be self-booting - just set bios to boot from CD and put the disk in the drive and restart PC. It will run automatically.

4. Do you have four sticks of RAM or two? Filling all four slots on a mobo can cause instability which can usually be corrected by adjusting the RAM timings and/or RAM bus speed down to a slightly more conservative setting. A way to test for this is to try running with 2 gig in there for a while and see if you still have the BSOD.


Message edited by notherdude on 12-27-2008 at 07:14:53 PM
------------------------------ tehhardpro wrote :


notherdude u have an old hand. Having an old hand doesnt make sence. Cuz its old. get a new one.. seems like ur hand doesnt understand what it is writing. So placve it in ur rig instead of vista human orgnoids will amke more sense
Reply to notherdude

Are you overclocking?

Might be the cause.

If yes, go to your BIOS and reset to default.

Reply to loneeagle

Tried everything you all said, and it's still doing it.

Reply to campbullard
- 0 +

Memtest86 is pretty much old school use the Microsoft Memory Diagnostic, its been specifically designed to fiind errors that will affect the system in the Windows operating environment.

It initially runs 6 tests, then you can press T and it will run extended tests, 11 in all, runs exactly like Memtest86 but way more thorough.

http://oca.microsoft.com/en/windiag.asp

------------------------------ Badges? We don't need no stinkin' badges!
Reply to 4ryan6

4ryan6 wrote :

Memtest86 is pretty much old school use the Microsoft Memory Diagnostic, its been specifically designed to fiind errors that will affect the system in the Windows operating environment.


What the difference with the one included with Vista (under the Administrative Tools) ?

Reply to loneeagle

I have ran memtest and windows diagnostic multiple times and they both say my memory is fine.

Reply to campbullard
Tom's Hardware > Forum > Windows Vista > Vista General Discussion > BSOD problem
Go to:

There are 1226 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them