BSOD help!

[jfkk]

Hello, could anybody please help me with this issue:

Page_Fault_In_Nonpaged_area

STOP: 0x00000050 (0xBAD0B148, 0x00000000, 0x805BB45E, 0x00000002)

----- 32 bit Kernel Mini Dump Analysis

DUMP_HEADER32:
MajorVersion 0000000f
MinorVersion 00000a28
DirectoryTableBase 0a4d0020
PfnDataBase 81000000
PsLoadedModuleList 8055d720
PsActiveProcessHead 805638b8
MachineImageType 0000014c
NumberProcessors 00000004
BugCheckCode 10000050
BugCheckParameter1 bad0b148
BugCheckParameter2 00000000
BugCheckParameter3 805bb45e
BugCheckParameter4 00000002
PaeEnabled 00000001
KdDebuggerDataBlock 8054d2e0
MiniDumpFields 00000dff

TRIAGE_DUMP32:
ServicePackBuild 00000300
SizeOfDump 00010000
ValidOffset 0000fffc
ContextOffset 00000320
ExceptionOffset 000007d0
MmOffset 00001068
UnloadedDriversOffset 000010a0
PrcbOffset 00001878
ProcessOffset 000024c8
ThreadOffset 00002728
CallStackOffset 00002980
SizeOfCallStack 00000310
DriverListOffset 00002f20
DriverCount 00000084
StringPoolOffset 00005650
StringPoolSize 00001230
BrokenDriverOffset 00000000
TriageOptions 00000041
TopOfStack ba4f3cf0
DebuggerDataOffset 00002c90
DebuggerDataSize 00000290
DataBlocksOffset 00006880
DataBlocksCount 00000002


Windows XP Kernel Version 2600 (Service Pack 3) MP (4 procs) Free x86 compatible
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Sun Jan 04 18:19:05 2009
System Uptime: 0 days 0:09:59
start end module name
804d7000 806e4000 nt Checksum: 001FBC56 Timestamp: Thu Aug 14 11:33:13 2008 (48A3FBD9)

Unloaded modules:
aa580000 aa5ab000 kmixer.sys Timestamp: unavailable (00000000)
ba774000 ba775000 drmkaud.sys Timestamp: unavailable (00000000)
aa5ab000 aa5ce000 aec.sys Timestamp: unavailable (00000000)
aaa49000 aaa56000 DMusic.sys Timestamp: unavailable (00000000)
aa8c9000 aa8d7000 swmidi.sys Timestamp: unavailable (00000000)
ba64a000 ba64c000 splitter.sys Timestamp: unavailable (00000000)
ba490000 ba495000 Cdaudio.SYS Timestamp: unavailable (00000000)
ba564000 ba567000 Sfloppy.SYS Timestamp: unavailable (00000000)

Finished dump check

winXP Svpack 3 Home edition ENG, AMD Phenom Quad-core, ASUS M2N SLI, 2GB RAM DDR2, HDD SEAGATE 500GB, ATI Radeon 3870 512MB GDDR4 PCI-E.



1.) RAM tested by MEMTEST; 2x always 7 hours at minimum. No errors.
2.) HDD tested by chkdsk. No errors.
3.) XP reinstalled, sound, video card driveres updated, BIOS updated, chipset updated.
4.) Antivirus + firewall changed without any positive result.
5.) No new hardware pluged though the computer is "relatively" new i.e. everything may be the cause.
6.) XP hotfixes installed.
7.) As I remember the BSOD appeared whed I was connected to DC++ (P2P network)...

Thanks for any help!

 

[NSSwift]

I just got this exact same Stop Error.

You seem to have asked the same question in another language at http://www.pcforum.sk/blue-screen-vo-winxp-pomoc-vt56139.html
Did you find a solution?
Though I couldn't understand it I noticed something about Daemon Tools and ZoneAlarm, both of which I am running.



PAGE_FAULT_IN_NONPAGED_AREA

STOP: 0x00000050 (0xBAD0B148, 0x00000000, 0x805BB45E, 0x00000002)

Unfortunately my computer refuses to produce a minidump, so I can't confirm the rest. Event Viewer shows no errors that might be related.

My setup:

Fully updated WinXP
AMD Athlon 64 x2 4600+(F3)
Gigabyte GA-MA78G-DS3H
4GB DDR2 (OCZ SLI-Ready)
36GB Raptor, 2x250GB Samusung in RAID1, 750GB Samsung Spinpoint F1
Using onboard 780G graphics (Radeon HD 3200)

 

[jfkk]

Actually I still do not have the answer. The guy on that website checked my memory.dmp file, drivers and also the system for malware. Nevertheless without specific success. Finally he recommeded to change the firewall (Zonealarm) and uninstall daemon tools. Nevertheless it did not help much as I had the BSOD again. Based on this I tried to be less sophisticated and just tested the memory sticks but not by software (i.e. memtest) but I released one of the sticks and also changed slots (I have two memory sticks and four slots). Somehow it seems to be working as BSOD dispeared. But what was the main reason I do not know. (Obviously, one could tell it is a slot because currrently Im using both sticks however one is different slot and the system is stable, nevetheless my motherboard was tested by wholesaler without problem). This 0x....50 fault is quite tricky.

What I recommed:

1.) Test your system for malware by gmer (search in google) or better reinstall. Install only necessary software and slowly add the rest. Update drivers (video, soundcard, BIOS, chipset...). If you are lucky you will find the problem program.
2.) Run memtest at least few hours.
3.) Release memory sticks and use only one and in different slot. You will, see whether the system is stable or not.
4.) Check your HDD by test tools released by the manufacturer and by chkdsk.
5.) Check the video card.

 

[jfkk]

Otherwise if you find an answer pls let mi know.