IDE DVD drive problem
Last response: in Windows Vista
hello friends,
I am in a horrible situation with my system now. the spec of my system is,
Intel DG33FB mobo
Intel Core2 Quad 6600@2.4Ghz/800Mhz FSB
Kinston DDR2/4GB@800Mhz
250 GB Seagate Baracuda SATA HDD
nVidia Quadro Fx 1400 PCX Card/128MB
Two LG DVD RW+ IDE based DVD writers.
The problem is my two DVD writers are working fine on another computer with its IDE cable,but it is not working with my mobo.Recently I installed vista ultimate (clean installation).
Your kind assistance is highly appreciated.Thanks in advance.
I am in a horrible situation with my system now. the spec of my system is,
Intel DG33FB mobo
Intel Core2 Quad 6600@2.4Ghz/800Mhz FSB
Kinston DDR2/4GB@800Mhz
250 GB Seagate Baracuda SATA HDD
nVidia Quadro Fx 1400 PCX Card/128MB
Two LG DVD RW+ IDE based DVD writers.
The problem is my two DVD writers are working fine on another computer with its IDE cable,but it is not working with my mobo.Recently I installed vista ultimate (clean installation).
Your kind assistance is highly appreciated.Thanks in advance.
More about : ide dvd drive problem
Friend,
I have tried with a single dvd (setting the jumper to master and then again to cable select mode) drive also. There is no wrong with the jumper settings friend.. I have checked the ide cable and the dvd drives with another computer.All of them work.
I tried to check with editing the registry (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}), but I don't know how to find the 'upper' and 'lower' filters.It shows only 0000,0001,......... ,0008 and 'property'.
When the drive is attached my PC hardly boots, an unblinking cursor shows up against a black background.Thats all.
I have tried with a single dvd (setting the jumper to master and then again to cable select mode) drive also. There is no wrong with the jumper settings friend.. I have checked the ide cable and the dvd drives with another computer.All of them work.
I tried to check with editing the registry (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}), but I don't know how to find the 'upper' and 'lower' filters.It shows only 0000,0001,......... ,0008 and 'property'.
When the drive is attached my PC hardly boots, an unblinking cursor shows up against a black background.Thats all.
Related ressources:
- ForumDVD drive not working on the same IDE cable as HDD
- ForumPc not booting up if IDE cable is plugged into dvd drive
- ForumHard drive ide as slave to dvd drive
- ForumHaving a problem with IDE DVD drive - Please advise
- ForumP5G41T-M LX3 not detecting IDE DVD drive
- ForumIDE DVD drive problem
- ForumBIOS not detecting IDE DVD drive
- ForumIDE ->SATA DVD drive problems, 4 pin connector doesnt fit.
- ForumProblem : No IDE slot left for my DVD Writer
- ForumIDE to SATA converter on DVD burner problem .
- ForumCan I use an IDE dvd drive with a SATA Hard drive ?
- ForumIDE Hard Drive and a SATA DVD drive
- ForumDVD not reading writing ide problem ?
- ForumCannot get my ide dvd drive to work with a sata to ide converter using win xp Wh
- Forum[Solved] Vista busness 32 product key free
- ForumHelp plz - Vista x64 Context menu problem
- ForumVista start up issues (CD drive)
- Forum[Solved] Program Files (x86) problem
- ForumGot a wierd problem
- ForumCan't boot from Vista 64-bit DVD... but XP 32-bit works fine!
- More resources
Read discussions in other Windows Vista categories
!
