Installing NAT & Firewall behind ADSL Router
Last response: in Networking
Our network administrator only gave me 1 class-c static IP address for my office. The static IP is 192.168.1.244. The problem is I need to share this connection to 4 more computers & be able to control their access by MAC address. To complicate things further, they are only allowed to access the internet during specific times of the day only, like from 11:30am to 3:00pm.
I am planning to use Wingate as my gateway. Is it possible? If it is, please give me a few hints on how to start. Thanks
I am planning to use Wingate as my gateway. Is it possible? If it is, please give me a few hints on how to start. Thanks
More about : installing nat firewall adsl router
Well not familiar with the gateway you suggested but this should work out of the box with exception of the control by mac address and restricting the internet. Just dig into the manual of the gateway and figure it out. I know all of this stuff is possible with a cheap router hacked with dd-wrt firmware so if you gateway is descent it should work.
Related ressources:
- ForumWin 7 networking problem - more than one NAT
- ForumNAT configuration
- ForumHow to install NAT
- ForumNAT is not a mechanism for securing a network.. but.. HELP!
- ForumIPv6 and Symmetric NAT
- ForumSkype problems with routers and NAT
- ForumFree Remote Access SW that works behind NAT without portfo..
- ForumNeed info for NAT 's and booting up a computer for the first time
- ForumNat enabled routers?
- Forumis a NAT device/'home router' - a router?
- ForumMSN Messenger not detecting UPNP NAT Connection
- ForumHow to set up IPsec VPN server and clients behind NAT with..
- ForumNAT and VPN problem
- ForumDLink DSL-G604T NAT +Static configuration
- ForumVPN and NAT ?
- ForumOpinions: To NAT or not to NAT ?
- ForumNAT
- ForumHelp a no nat configuration with firewalls?
- ForumHow to setup a 1GB Gigabyte Network
- ForumVista and Norton Firewall
- More resources
Read discussions in other Networking categories
!
