i currently have windows xp x64 installed on 2x160GB SATA hard drives in a RAID 0 configuration.
what's the best approach for setting up the pagefile in terms of performance and optimization given the following options:
- keep the pagefile on the RAID 0 configuration
- add a separate SATA hard drive for the pagefile to the same SATA controller that the RAID 0 setup resides on
- add a separate SATA hard drive for the pagefile to a separate SATA controller
thanks for any suggestions.
Message edited by Matt26 on 06-23-2009 at 03:56:52 AM