Tom's Hardware > Forum > Graphic & Displays > TV/Video Cards > TFT panel resolutions
Word :    Username :           
 

Hi

(also posted in software/xp/drivers forum not sure where is best)

I have got a 17" tft panel attached via a VGA lead on my secondary output
I want to reduce the visible screen size to about 2/3 of normal area
ideally retaining native resolution
full screen = 1280x1024
half size = 1140x512

can this be done (I have seen it on an old laptop)

thanks for any suggestions

Phil

Sponsored Links
Register or log in to remove.

I want to reduce the resolution and shrink the screen size so i get borders around the image

The reason:
a few years late but was always interested in the article on here to create a projector using a OHP and an old TFT panel
unfortunatly a 17" panel is larger than the projector bed
It works well running things in a window and have got a 16:9 template to block out the image around the bit i want to project.

so i need to shrink the visable area on the tft panel so it fits within the bed

a lower than native resolution auto resizes to fill the screen htis is what i want to prevent.

I can get about a 90" 16:9 image any more than this suffers from excessive colour bleeding and dull colours. (the room does have to be reasonably dark though)

Reply to kwak5tar
Tom's Hardware > Forum > Graphic & Displays > TV/Video Cards > TFT panel resolutions
Go to:

There are 900 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them