/ Sign-up
Your question

Port Forwarding with a Router - Router setup

  • Configuration
  • Routers
  • Internet Connection
  • Port Forwarding
  • Wireless Networking
Last response: in Wireless Networking
May 27, 2008 3:02:34 PM

My landlord is providing me with an Internet Connection. And he is doing it by splitting the internet through a Wireless router from the Cable Modem, and I am using my own router to get wireless and connect two computers wired.

All is fine with internet working without any problems.

What I want to know is how I could go about doing port forwarding for this setup.

I want to use DC++, and for that I have to forward the port used by DC++ to the WAN IP. With a single router it's pretty simple, but how can I go about doing this with two routers ?

Any one done this or could give me a clear picture as to how this could be done ?


More about : port forwarding router router setup

June 1, 2008 8:18:05 PM

forward port from first router to second router. then forward port from second router to computer. That SHOULD work, but then again NAT inside a NAT is pretty lame and who knows