Hi, i got a X2 4600 on gigabyte GAM57SLI S4 mobo, with 2x1 a-data vitesta extreme edition pc2-6400 800 cl4, 2,0-2,1 volts.
Cpu-z, under memory tab shows corect frequency (400) but timings of 5.Under the SPD tab, in the bottom section, the timings shown for 400Mhz are 4.
Easytuner from gigabyte shows my memory voltage at 1,9. Pc wizard also shows my timings at 5.
The bios is updated to last version, but there is no place where i can see memory timings or adjust them.
Can anyone please help so i can find out what the real timings are that my memory is running at, and if they are 5, how can change them?
I tryed memset and a64 tweaker, but dont really know how to use them.
any help is greatly apreciated, thank you.
Cpu-z, under memory tab shows corect frequency (400) but timings of 5.Under the SPD tab, in the bottom section, the timings shown for 400Mhz are 4.
Easytuner from gigabyte shows my memory voltage at 1,9. Pc wizard also shows my timings at 5.
The bios is updated to last version, but there is no place where i can see memory timings or adjust them.
Can anyone please help so i can find out what the real timings are that my memory is running at, and if they are 5, how can change them?
I tryed memset and a64 tweaker, but dont really know how to use them.
any help is greatly apreciated, thank you.
Facebook
Twitter
Instagram