P182 - Will it house these parts?

johnw18

Distinguished
Jun 26, 2007
2
0
18,510
I'm building a new system, and I've been looking for a suitable case. Not looking for anything too flashy, just functional and sleek - and the P182 looked to be a good fit.

I was wondering if it would fit a Asus Striker, or eVGA/BFG mobo(mobo tips would be good too), BFG 8800 GTX OC, and a OCZ 850W GameXStream PSU. Also, I was wondering if it would fit 2 8800 GTX's as that's my half-way upgrade plan when the PC starts slowing down or a windfall.
 
A good sledgehammer should solve it very quickly :p

Seriously now, the 8800 GTX cards will fit, but barely, which is bad for cooling and will require leaving some hard disk bays empty. I don't know about the PSU, it may be too big.

I'd consider a bigger case such as Thermaltake Armor or Silverstone TJ09.
 

malcom

Distinguished
May 23, 2005
25
0
18,530
You might run into problems with that power supply because its too long, and then you'll have to remove the lower fan to get it to fit.
The graphics cards should fit as long as you remove the upper HDD cage.