print servers doesn’t work

i got a problem with USB 2.0 print server. I tried two different models. The first one was same Edimax, now it’s LevelOne FPS-9022. Both find the printer (HP LaserJet 1022) which is connected with printserver and they recognise if is priter on or off. Problem is current status. If printer is on, the status is still paper out (with a lot of paper in). Of course printer doesn’t print – I can send page for print, but nothing happen. Printer works normally connected with PC.

Here is print server system information:

Device Name : PS3E54D3
Raw Printing : Enable
Printer Server Name : PS3E54D3
IPP Printing : Enable
Model Type : 1U Print Server
LPR Printing : Enable
Firmware Version : 8.0.20
AppleTalk Printing : Enable
MAC Address : 00: 11: 6B: 3E: 54: D3
NetWare Printing : Enable
USB Port Number : 1
SMB : Enable
LPT Port Number : No
SNMP : Enable
Wireless Lan Status : No
NetBEUI : Enable

Thanks for help.