need overclocking advice

[goodass]

im currently using C2D E4300, Asus P5PE-VM mobo, 7600GS AGP, 1GB Kingston DDR400.
So how do i overclock my system? is it safe to tweak from 1.8GHZ to 2.2GHZ? this is my first time encountering overclocking.

 

[xciter]

Yes, going from 1.9 to 2.2 is safe, even to 2.8 and above 3Ghz. The temperature of your CPU should not exceed 60C under load.

 

[goodass]

so how do i overclock it? thru bios? i never do this by myself.

 

[nukemaster]

hop into the bios and bump the front side bus.

In your case the fsb is going to be 200(800 quad pumped)
I say you are safe at 266(that will give you 2.4ghz ) with no voltage increase. Give it a try and see how it goes

Also make sure you run orthos stress prime for at least 4(24 is ideal) hours to make sure its stable.

Best of luck.

 

[omzhky75]

basic query pls since im also an apprentice in overclocking. i have e6400 2.13ghz CPu, 1 gb ddr2 800, 7600 gs Vdeo card, unfortunately with way passed out mobo Asus P5ld2-vm SE(chipsets intel 945G northbridge, and ICH7) .i tried to overclock and having tried almost every advice and tips on OC but the most i can attain is on 2.38GH FSB.although the motherboard specify that its overclockable up to 30%, i think with this attain FSB even 15% OC has not been reach. can u pls help me figure it out what went wrong?why is OC strangled to taht speed only. tnx.