Search
Sign in with
Sign up | Sign in

Leftover Cables on a Nforce 680i

Last response: in Overclocking
Share

Ok, so I've got an Antec P182 case that has numerous front panel features I'm not sure where to plug into this Mobo, any help would be grand!

EDIT: This is an NForce 680i SLI 775


AC'97 ---> I think is irrelevant as it's overriden by the onboard sound I think?

1394 IEE ---> Not seeing anywhere to plug this in, so I'm guessing the front port is useless as the Mobo seems to have one built into the I/O anyways?

I think I found where the HD Audio cable plugs in (from which the AC'97 SHOULD theoretically be plugged in near if it does go somwhere...) down to the left of the on onbard speaker.

More about : leftover cables nforce 680i

Register or log in to remove

if you've got an HD Audio cable then use that instead of the AC'97 (which is there for older mobos).

1394 - your mobo may have headers somewhere as well as a port on the back panel. depends if it's the reference board (BFG, eVGA, XFX etc) or not (abit, Asus, Gigabyte etc.)
 
Ask the community
Read discussions in other Overclocking categories
!