new system for triple monitor

[sharp910sh]

I'm building a new system for a triple monitor set up

here are the specs
E8650
P5K deluxe wifi
Platinum revision 2 6400 OCZ 800 mhz ram
Seagate 320GB Hard Drive SATAII 7200RPM 16MB Cache - OEm
2x x1950 pro in crossfire
HP DVD1040i 18x DVD±RW/RAM Lightscribe Black
and a case which i haven't decided about yet


what do you think?
how could i improve it?

 

[sharp910sh]

also a 580 watt, type m psu

 

[mike99]

Make sure it's a good quality PSU, not a $50 piece of rubbish. If you put the 1950s in crossfire, you can only use one monitor! Just fit the two, without.

Mike.

 

[sharp910sh]

well, im going to disable the crossfire when im using 3 monitors, but enable it when im playing a game. well whats wrong with the 580w hiper type m? what would you recommend and it costs $100 (£52 as im in the uk )

 

[mike99]

Hiper is fine, I have a 420W myself. You need to run at abot 1600 res to benefit from crossfire, at 1280x1024 no improvement.

Mike.

 

[sharp910sh]

well, ima run a 22" monitor 1680 x 1050. so that should be good enough.