Yorksfield - 680i or P35?

Right now I've decided to buy an E6750 and wait untill Yorksfield to buy a Quad-Core CPU.

Which chipset would be better for the 45nm Quad-Core Yorksfield, 680i SLi or P35 and in what ways?

Thank You.
17 answers Last reply
More about yorksfield 680i
  1. We had this discussion at length earlier, the P35 of course.

    P.S. it's Yorkfield not Yorksfield.
  2. please dont flame me but


    in no way should you go for the p35 unless your money limited.

    the 680i is a good chipset, but im leaning on the x38. although you havent listed it, im gonna tell you why its more worth it.

    in the long run, like th 975x ( which is still pretty strong ) you will get support. and lots of it.

    the x38 over the 680i is built for 45nm and quad cores while the 680i does support it, i imagine that the bios flash will incur more bugs.

    unless you want sli or multi monitors, you wont need the 16x16x8. the x38 offers PCIe 2.0 and 16x16.

    with the x38 you can expect top notch quality from manufacturers, and fancy onboard cooling etc.

    also, if you must have sli, theres the new c73 and mcp 78D ( expecting nov.) that should support sli,45nm and all the rest of it.

    now, why you shouldnt go for p35? because its intended as mainstream. you wont get all the features ( and thats fine as long as you dont need them) and you might not get the full 9 yards.

    meanwhile you have the mature and feature packed 680i. now with that, i sugguest you look at gigabytes offering. also, the striker extreme. i tend to stray away from reference due to the fact that theyre quite bland.


    and now i leave you with more $^!#T to think about.

    hope it helps :kaola:
  3. Zorg said:
    We had this discussion at length earlier, the P35 of course.

    P.S. it's Yorkfield not Yorksfield.


    I specifically said WHY, as in why is P35 better for Yorkfield?
  4. tehrobzorz said:

    the x38 over the 680i


    Wow, I just saw the Gigabyte X38 board and I'm in love!
    It's got PCIe 2.0, SLi AND DDR2!

    Only problem is it will be released in September, and I'm pretty sure thats after the end of summer vacation :lol:
  5. Yeah, the X38 would be the way to go, if it was out when the Yorkfield is released. I was thinking Q6600, because I can't wait for the Yorkfield.

    @Track, read this article, which I thought that you had already read from our previous discussion, but maybe you didn't. It makes no sense for me to rehash the reasons just read the article. It's all there.
    http://www.anandtech.com/memory/showdoc.aspx?i=2989&p=1
  6. Quote:
    Only problem is it will be released in September, and I'm pretty sure thats after the end of summer vacation :lol:



    so by that.. im guessing you need one really soon?

    in that case..

    Asus P5K Deluxe/Premium P35 Chipset.
    Asus P5N32-E SLI Deluxe/P5N-E Plus./Striker/Striker extreme 680i Chipset
    looks/functionality/crossfire support/heatpipes/esata etc...

    Quote:
    Wow, I just saw the Gigabyte X38 board and I'm in love!
    It's got PCIe 2.0, SLi AND DDR2!


    im pretty sure you meant 680i not the x38. Although intel is rumoured to have sli on its chipsets soon enough, i doubt it would be on the x38.

    anyhow, look at the two asus i chose for you. theyre both ddr2 ( or if not, i meant for them to be since there are two versions)


    happy motherboard selecting!! ^^ i love ASUS>
  7. Perhaps Track meant:
    http://www.bit-tech.net/news/2007/06/06/gigabyte_x38_boards_look_promisi ng/1
    or:
    http://www.hardwarezone.com/articles/view.php?cid=6&id=2315
    or:

    http://techreport.com/onearticle.x/12626
    or:
    http://xtreview.com/addcomment-i d-2920-view-Gigabyte-GA--X-38--DQ-6.html
    or:
    http://www.hardwarezone.com/artic les/view.php?cid=6&id=2315
    or:
    http://www.hexus.net/content/item.php?item= 8923
    or:
    http://www.legitreviews.com/article/522/1/
    or:
    http://translate.goo gle.com/translate?hl=en&sl=zh-CN&u=http://product.pchome.net/diy_mainboa rd_gigabyte_x38_dq6/83672.html&sa=X&oi=translate&resnum=10&ct=re sult&prev=/search%3Fq%3DGIGABYTE%2BX38%26start%3D50%26hl%3Den%26client%3Dfir efox-a%26rls%3Dorg.mozilla:en-US:official%26sa%3DN

    Many more...Google
  8. Zorg said:
    Yeah, the X38 would be the way to go, if it was out when the Yorkfield is released. I was thinking Q6600, because I can't wait for the Yorkfield.

    @Track, read this article, which I thought that you had already read from our previous discussion, but maybe you didn't. It makes no sense for me to rehash the reasons just read the article. It's all there.
    http://www.anandtech.com/memory/showdoc.aspx?i=2989&p=1


    This is the conclusion of the article.

    "we found no real difference in current performance of DDR2 and DDR3 on the P35 platform. Both were equally faster than the same DDR2 on the P965 chipset."

    As I'm not going to buy P965, I don't see how this is relevent.
  9. tehrobzorz said:

    so by that.. im guessing you need one really soon?


    Havn't you noticed that summer vacation ends in a single month?

    I don't think I want P35 because it's lack of SLi.

    But I'm not sure if I'll be able to reach my 500Mhz FSB goal on 680i SLi.
  10. Track said:
    This is the conclusion of the article.

    "we found no real difference in current performance of DDR2 and DDR3 on the P35 platform. Both were equally faster than the same DDR2 on the P965 chipset."

    As I'm not going to buy P965, I don't see how this is relevent.
    Here is the quote that shows the relevance you are looking for
    Quote:
    P965 brought very minor changes, mainly in the straps and overclocking ability of the memory. The NVIDIA 680i/670/650 actually shows decreased buffered bandwidth, but unbuffered bandwidth is about the same as P965.
    You need to read the article not scan it. If you can't see the benefit of the P35 over the 680i, then just get the 680i. If you want SLI, then the point is moot, get the 680i. Or, just get the 680i anyway. Best to wait for the X38. Supposedly it will have SLI and a lot more features, only time will tell.
  11. Track said:
    Havn't you noticed that summer vacation ends in a single month?

    I don't think I want P35 because it's lack of SLi.

    But I'm not sure if I'll be able to reach my 500Mhz FSB goal on 680i SLi.



    sorry but not everyone lives in the USA.

    500? you seem really confident.

    id say if you want fsb speeds, a DFI board is due out later and is said to reach 600+ fsb soo youll want to look at that.

    if not, the 680i is mature and wil get you to id say at least 400-450 ( with the striker as ive heard)
    so, best case scenario, i myseelf woould go for the 680i.
  12. Track said:
    Wow, I just saw the Gigabyte X38 board and I'm in love!
    It's got PCIe 2.0, SLi AND DDR2!

    Only problem is it will be released in September, and I'm pretty sure thats after the end of summer vacation :lol:



    Don't expect SLI to work on a non-Vnidia/SLI mobo without modded drivers. X38 is for CrossFire not SLI. If you intend to only get one GFX card then your ok.
  13. Zorg said:
    Here is the quote that shows the relevance you are looking for
    Quote:
    P965 brought very minor changes, mainly in the straps and overclocking ability of the memory. The NVIDIA 680i/670/650 actually shows decreased buffered bandwidth, but unbuffered bandwidth is about the same as P965.
    You need to read the article not scan it. If you can't see the benefit of the P35 over the 680i, then just get the 680i. If you want SLI, then the point is moot, get the 680i. Or, just get the 680i anyway. Best to wait for the X38. Supposedly it will have SLI and a lot more features, only time will tell.


    Will you stop making me feel bad?

    Of course I want X38. If there was an X38 DDR2 board out right now, I'd buy it in a heart beat.

    But there arent and by the time X38 is out summer vacation will have been long gone.
  14. The P35 is the replacement for the P965 boards which are the known as bad a$$ overclockering and the mobo's that can get you past 500+FSB. On two different mobo (P5B D) I have hit 500 FSB on both, but if your processer doesn't like a high FSB (500+) then it don't matter what mobo you get. I have tried on two mobo to take my E6600 to 533 FSB and on both boards it just won't do it. It stops at the same place on both boards 525 FSB.

    The P35 is an awesome mobo and very popular right now, the only reason to wait is PCI-Express 2.0.
  15. asus p5k deluxe

    ddr2 version. expect quality from asus. =]
  16. check this out :

    http://event.asus.com/mb/45nm/

    680i and 650i also support 45nm CPU's , they only dont support DDR3
  17. or the p5k ^^


    asus has also made hybrid boards using the 590sli and 650i sli ^^

    check out the p5N range. MAKE SURE ITS NOT NFORCE 4
Ask a new question

Read More

Motherboards Chipsets Quad Core CPUs