hey, i have my system specs in my sig.
i have the latest bios for my board.
the right steppings for good results.
but icannot manage to run stable at 400fsb ++..
at 400fsb i have tried all these voltages
i have ran the cpu voltage from 1.34 - 1.45 cannot get stable
i have ran the northbrdge Vlt from 1.25 - 1.50 not stable
southbrige vlt from 1.5 - 1.6 not stable
1.2v Ht from 1.2 - 1.35 not stable
ram is at stock 2.1 voltage and very loose timings.
i ve tried 3:2, 1:1, 5:4 cpu:ram ratios and 400fsb , not stable.
i ve disabled spread spectrum, encahced dis, and all those power saving settings, still couldnt get stable.
ive dropped the x 7 multiplier to x 6 and 400fsb and still getting either no boot or freeze shortly after boot with either multiplier.
any suggestions?
i have the latest bios for my board.
the right steppings for good results.
but icannot manage to run stable at 400fsb ++..
at 400fsb i have tried all these voltages
i have ran the cpu voltage from 1.34 - 1.45 cannot get stable
i have ran the northbrdge Vlt from 1.25 - 1.50 not stable
southbrige vlt from 1.5 - 1.6 not stable
1.2v Ht from 1.2 - 1.35 not stable
ram is at stock 2.1 voltage and very loose timings.
i ve tried 3:2, 1:1, 5:4 cpu:ram ratios and 400fsb , not stable.
i ve disabled spread spectrum, encahced dis, and all those power saving settings, still couldnt get stable.
ive dropped the x 7 multiplier to x 6 and 400fsb and still getting either no boot or freeze shortly after boot with either multiplier.
any suggestions?