e4400 or e4500 at 3.6 or 3.8

roncpem

Distinguished
Jan 1, 2006
202
0
18,680
Does anyone have an e4400 or e4500 running at 3.6 or 3.8 on air? I just purchased a p35 ds3r & would like to get one of these cpu's if they will reach 3.6 to 3.8 easily on air. I have a V-1 cooler & G. Skill 800 ram to go with them. Iv'e had the ram to 900+ easily. Thanks in advance.
 

little_scrapper

Distinguished
Aug 2, 2006
621
0
18,980
I have the E4300 pruchased back when they OC'ed well. Mine only does about 3.3Ghz. You buy one today, I wouldnt expect anything more and probably less like 2.8gHZ. You want a E4400 @ 3.8Ghz? Good luck with that.
 

truehighroller

Distinguished
Oct 1, 2006
608
0
18,980
I have my e4400 doing ortho right now as I type running @ 3.3ghz v1.55 71c. I'm burning it in at first I could only get 3ghz. I say get one it spanks the extreme in bench's I have a vista expierience index of 5.8. My FSB is 1320mhz.
 

truehighroller

Distinguished
Oct 1, 2006
608
0
18,980
Ok I finished burning her in and back her down a little to 3.25 @ 1.51 or so. I got her down temp wise to 64 full load by orthos. I am happy with this for now memory bandwidth is 6500 roughly mb/s. Here is my current setup.

Zumax 520w 20A per rail 38A total
GA P35 DQ6
4X 1GB Sticks of Kingston value ram ddr2 667
E4400 @ 3.25 1.51v~
2 Western digital 250gb 16MB cache sata2 drives in raid0
SATA Philips 20x DVD Burner
Asus EAX1900XTX 512 MB
Sound card
Bunch of fans and some good thermal grease
Zalman heatsinks,
Vista Ultimate X86