Sata as slave Tags: SATA Boot Windows XP Last response: January 27, 2010 4:33 PM in Windows XP Share ekinhorzum January 27, 2010 3:22:39 PM Hi I am trying to find a way to reach and copy my files on my SATA (which does not boot) through my ATA drive. Which BIOS adjustment or jumper combination do i need? More about : sata slave aford10 January 27, 2010 4:33:09 PM The IDE drive should be set as master or cable select. It should be set as the first boot device in the BIOS. In the BIOS, the SATA drive should be listed as 2nd in the hard drive priority. m 0 l Can't find your answer ? Ask ! Publish Related resources SolvedSATA to PATA, Master/Slave configuration? Forum Solvedcan you have an IDE as a master HDD and a sata as a slave? Forum SolvedIDE & Sata Slave Master Forum SATA slave in SSD HD computer Forum Can I install SAS 120mb as a slave with SATA 32mb as primary? Forum slave sata drive Forum Sata Master Slave questions Forum IDE Master, IDE Slave, SATA 1 2 3 4 Not Detected Forum Slave SATA HDD not reading, locked up Forum IDE HDD Master with SATA HDD SLAVE? Forum Using ide as a slave to sata Forum Hw to open sata slave and master hard drive Forum Sata hdd as a slave Forum How do I set master / slave for SATA and IDE drives? Forum SATA hard drives master slave arrangement on HP xw workstation Forum Master slave for sata hdd in asus m5a97 Forum How to use sata as my operating system and ide as slave Forum SATA set as a slave drive to a solid state master drive Forum How do I set master / slave for SATA and IDE drives? Forum Sata master hard drive and ide hard drive as slave Forum More resources Read discussions in other Windows XP categories Configuration Customization Drivers Security Video !