I know you guys wont believe me so i will post some pics with this information
my q6600 processor is currently at 3.4ghz and is completly stable, didnt somebody say 3.6ghz is not possible? I'm pretty sure i can reach that. I have the MSI P35 Platinum board which i just got today and started fiddling around. The amazing thing is that this is accomplished on AIR COOLING!! Even overclocked to 3.4ghz, my core temp is only around 120* F!! tested with CoreTemp .95 burn in under Sisoft Sandra.
I have a Zalman CNPS9500 cooler.
Any questions?
if you want i will post images of the bios settings too
actually i'm not sure how to attach a pic?
i will post one if you guys let me know how i can do it.
good for you , but what u posted HAHA in your thread ,? are u competing with someone ? also i have seen 3.6 q6600 in this forum and it was stable ,and also believe it or not i have seen a QuadCore @ 5.1 http://www.vr-zone.com/?i=5198
---------------
"I ordered to bury my body without coffin untill the ingredients of my body gradually become part of Iran."
The Great Koroosh
LOL,Maziar ma" man,cant u give the dude a piece of happiness of his own,hes got to reach that high and its somewhat big thing for his part. Gud Luck jbenchley on your endeavor to level out with 5.1,hehehe
---------------
e6750@3.7ghz 1.5v,ds3r, ultra 120 extreme,2X1gb geil ddr2 800
3d aurora full,x1950 pro 512/256b, 320 &160 seagate
And who said Q6600 @ 3.6 is impossible? With a B3 revision it might pose a challenge but if you got a newer G0 then 3.6 is a piece of cake on air cooling.
Hey, I suspect OP doesn't answer due to system failure. He's probably busy RMAing. I saw your other (group badly in need of real women, not inflatables) post. Here is the only post from that section you missed while you were gone. I saved it for you.
i leveled it off at 3.555ghz
i could probably go higher but i dont want to push her to the limit. still unbelievable that my temps are only reaching around 125*F when running sandra? i thought these chips ran hot? check out some of the other forums on the q6600 in tomshardware, one guy asked if he could get it to 3.6ghz and lots of people on this forum said no way on air cooling. Funny thing is temp is my last concern when i was doing my OCing never had a temp problem
Hey by the way Maziar, that link you posted that you said the guy overclocked his quad to 5.1ghz, that was a Intel Duo Core 2 Extreme QX6850. Not a Quad Core so get your story straight. Man i am psyched out that i got this mofo over 1ghz above factory. It's not easy takes a lot of tweaking and the right parts. also i was wondering if anybody has had any stability on 64bit platform? any problems with programs running and drivers? i was thinking about upgrading my OS but i'm not sure yet i have heard of problems even now. Is there any real performance boost going to 64bit?
According to our tests and numerous overclockers’ reports online, quad-core Core 2 Quad Q6600 processors can overclock up to 3.6GHz with proper air-cooling.
---------------
"I ordered to bury my body without coffin untill the ingredients of my body gradually become part of Iran."
The Great Koroosh
3.6ghz for a q6600 g0 is not unheard of and actually not that rare. I've seen 3.8ghz stable by a guy with a Thermalright Ultra120 Extreme and I'm guessing really good airflow. He also has done a suicide run @ 4ghz.
I'm not sure exactly what your system components are, but if you don't have P35 mobo, thats a pretty good OC. If you really do plan on getting a great OC, get a P35, some ddr2 800 or 1066 ram and either the thermalright, tuniq or scythe coolers.
Otherwise, you have yourself a $1000 CPU for a fraction of the cost!
teron151 