I recently updated my 0202 bios that came with the P5N-E SLI board to the 0608 using the ez-flash utility in the bios. It successfully updated according to the BIOS but now I cannot get into the bios, yet the computer still boots fine and is orthos stable. Whenever I spam hit the DEL button to get into bios, it acts like it is going to boot into the bios but it just shows a blank screen and nothing else. I have no idea why the bios wouldnt work if the computer still works fine. Any suggestions?
I have the exact same problem, and I have also tried the 0607 BIOS using a floppy disc and.....no luck, my next hope is to try this http://www.rebelshavenforum.com/si [...] =22;t=0000 22;p=0 or the 0505 BIOS until they address this problem.
And goodluck mate!
EDIT: Ok I done what that website said and I also changed the name of the BIOS from "0608.bin" to "P5NESLI.BIN" and all is working fine + I can Overclock it lots more than before!! So I hope this works for you.
Message edited by TriggerHappyGTR on 08-18-2007 at 09:13:26 AM
Are you using a USB keyboard or mouse that can be the problem. This happen to me and all I did was plug in a P/S 2 keyboard and I got into the BIOs and resetmy settings.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.