When I flash my bios in Q-Flash to bios revsion F4g, it verifies that the flash successfully completes, but upon rebooting the computer keeps restarting with a bios auto-recovery message. The only way I can stop this is to remove the battery from the motherboard to clear the cmos, thats when it reverts back to the old F2 bios revision and boots fine thereafter. I've since downloaded the file again verifying that it's the right file and even use a new floppy, but still no success. Can anyone help?
------------------------------Q6600 (B3), Gigabyte GA-P45-DS3R, ATI 4870 512 MB, Seagate 320 GB Harddrive, PC8500 G. Skill 2*2GB memory, Xigmatek S1283 CPU cooler, NZXT Tempest Case, Corsair HX 620 Power Supply, HT Omega Claro sound card.
Nevermind, successfully ( at least that's what it said) flashed BIOS to F4g. Computer loaded to Windows then the computer rebooted, and now won't post. It powers up for three seconds then resets,and does this repeatedly until I shut it down. I have had nothing but problems with this board.
------------------------------Q6600 (B3), Gigabyte GA-P45-DS3R, ATI 4870 512 MB, Seagate 320 GB Harddrive, PC8500 G. Skill 2*2GB memory, Xigmatek S1283 CPU cooler, NZXT Tempest Case, Corsair HX 620 Power Supply, HT Omega Claro sound card.
Reply to rkl525
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.