P5K Premium RAID 0 ERROR : 0x0000007B.....

[Eagle-TSI]

Here's my config.

Antec Nine Hundred Mid Tower Gamer Case 900
Corsair CMPSU-620HX 620W
ASUS P5K Premium WIFI-AP
Intel Core 2 Duo E6750
Zalman CNPS9700NT
EVGA E-GEFORCE 8800GT SSC 700 MHZ
Kingston HyperX PC2-6400 2GB 2X1GB DDR2 800MHZ CL3-3-3-10
2 X Western Digital SE16 500GB SATA2 7200RPM 16MB Cache 8.9MS ( RAID )
Creative Labs Sound Blaster X-FI Xtreme Gamer
LG GSA-H62LN 18X/18X DVDRW BLK SATA
Pioneer DVR-212D Black DVD-RW 18X6X18
nGear Flash Card Reader 3.5IN Internal USB Black

Problom is that 10 - 15 secondes after choosing the Raid driver from a floppy at the windows xp installation, I got that error :

STOP : 0x0000007B (0xF78DA63C, 0xC0000034, 0x00000000, 0x00000000)

What I did yet

- installed windows XP on 1 hd , no-raid . WORKING
- Changed PSU, Video card = SAME PROBLEM
- Updated bios from 0204 to 0404


My 2 hd's are connected into the red connectors.

Anyone ?

 

[DD_Jay_AZ]

7B is always inaccessible boot device, either HDD's or CD-ROM

Make sure you're using the most recent F6 driver for whatever controller your using for the RAID array and also make sure that you're also using the F6 driver for your CD-ROM, assuming it's hooked up to the JMicron controller for IDE.

EDIT: I just checked, your CD-ROM is SATA, hook it up to the JMicron controller and put it in native mode, also load the JMicron F6 driver when installing Windows. That will fix your problem.

Windows can't access the CD-ROM when it tries to run the setup and install files, so you get an 7B stop even though it can access the HDD RAID