Sign in with
Sign up | Sign in
Your question

FSB Change Not Holding - GA-P35-DS3L

Last response: in Motherboards
Share
August 24, 2007 10:21:13 AM

Motherboard disables FSB Increases.
After increasing FSB to 266 from 200 (E4300), board double boots.
cpu-z show FSB @ 200 not @266.

Any ideas? Thanks.

(CMOS changes were saved with F10.)
Cmos settings:
MIT-
Enabled CPU HOST CONTROL
Set CPU HOST FREQUENCY to 266 (from 200 - CPU is E4300)
Disabled CIA2


Advanced-
Disabled CPU EIST Function

CPU-Z show FSB 200.

Checking BIOS - FSB Speed now set to DISABLED.

GA-P35-DS3L
E4300
Corsair TWIN2048-6400C4
DDR2 Voltage set to 2.1

December 24, 2007 2:33:05 PM

I had the same problem last night. Try removing powersupply cable and do something else for 10 min. Thats what I did. And it went back to normal.
December 24, 2007 2:44:43 PM

strange. didnt happen with me. do as suggested above. OR clear ur cmos. then try overclocking again.
!