I got an Abit SG-95 with Celeron 420 1.6GHz and I bought a DDR2 800 memory. Later I checked the manual and found out that it only supports DDR2 667/533. Is it possible for me to use the DDR2 800 anyway? Will there be any drawbacks then?
I got an Abit SG-95 with Celeron 420 1.6GHz and I bought a DDR2 800 memory. Later I checked the manual and found out that it only supports DDR2 667/533. Is it possible for me to use the DDR2 800 anyway? Will there be any drawbacks then?
Thanks.
You should be able to use the DDR2 800 you have, but it will not run at 800 mhz. It should work fine.
Message edited by badge on 08-26-2007 at 07:19:39 PM
I will say DDR2 667/533 requires slightly less voltage. The DDR2 800 is 'backwards' compatible to 667/533, but you may want to increase to RAM voltage in BIOS with the DDR2 800. DDR2 800 normally runs to specs at 2.0-2.1v. in BIOS. It should run fine.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.