D975XBX dont see oveclocking

[Milos]

Hi.
I was truing to OC my E6600 but there is a problem.
My motherboard is D975XBX and it shows no OC options.
Can you help me on this???

rest of the sistem is:
WIN XP sp2
E6600
2 gigs Samsung original 800 Mhz
7900GTX 512Mb
Raptor
500Watt Enermax Liberty
..................................
Thank you all!

 

[akhilles]

Go to BIOS > ADVANCED > Default Configuration Override.

http://www.anandtech.com/printarticle.aspx?i=2681

 

[Milos]

Thank you very much.
Can you just tell me where to start .. I just wanna push it to 3 Ghz,and do I have to do "debug mode" http://forums.legitreviews.com/about6375.html
or NOT???

 

[akhilles]

http://download.intel.com/apac/reseller/DIY/How_tverclock_ENG.pdf

http://www.tomshardware.com/forum/240001-29-howto-overclock-quads-duals-guide

 

[Milos]

you are THE MAN!!!
I'm gonna try it

 

[Milos]

Front Side Bus Voltage Override???
Do I have to set it at 1.33?
Thank you

 

[akhilles]

Increase voltage if it's unstable. i.e.

FSB = 266 @ stock
FSB = 400 @ o/c'ed

Up FSB voltage a notch until it's stable. Same for DDR2 & CPU.

 

[Milos]

Thats the problem,my motherboard sees only http://www.madshrimps.be/?action=getarticle&number=6&artpage=1934&articID=470
without debug-mode!

 

[akhilles]

You have to mod the mobo to overclock, according to your link. Look around other forums for help. I have never used that board.

 

[Milos]

http://forums.legitreviews.com/about6375.html#p45099
but musst be a simple way!!
any ideas?

 

[Milos]

i ment harmlles way

 

[Milos]

my only hope you are

 

[akhilles]

Go go ADVANCED, CHIPSET CONFIG. Do you see this screen in bios? If so, you can o/c the pc. Refer to the Intel guide.

http://images.anandtech.com/reviews/cpu/intel/975x_chipset/biosadvance.jpg

For the whole review:

http://www.anandtech.com/printarticle.aspx?i=2681

 

[Milos]

No,I see only the second part of the screen in my BIOS.
It looks like I have to do debug-mod! but i dont know how!

 

[akhilles]

Well, the 2 links you listed tell you how to mod the board. I suggest against it cuz it'll void the warranty. If you must overclock, sell it & get a cheap board that doesn't hide the advanced o/c options. IBM is the only one that hides them that way. Gigabyte shows them when you press CTRL-F1 in BIOS.

This is $70 after rebate & o/cs well:

http://www.newegg.com/Product/Product.aspx?Item=N82E16813127031&Tpk=ABIT%2bIP35-E

 

[Milos]

That's very kind of you.
I don't wanna bother you anymore.
I am very sad about my situation ... I must stay on stock speed
Buy Buy